Tenders Are Invited For Thermal Modernization Of A Historic Building In Nowa Ruda - A Branch Of The District Labor Office In Kłodzko

The Subject Of The Order Is The Thermal Modernization Of A Historic Building In Nowa Ruda - A Branch Of The District Labor Office In Kłodzko. 2. The Order Includes In Particular: 1) Insulation Of The Flat Roof From The Inside Using Mineral Wool With A Thermal Conductivity Coefficient Of Λ = 0.031 W/M•K, 18 Cm Thick, And Λ = 0.044 W/M•K, 30 Cm Thick, Which Will Effectively Reduce Losses Heat And Improving The Energy Efficiency Of The Building; 2) Renovation Of The Roof Covering, Including Replacing The Layers Of Roofing Felt With New Layers Of Heat-Sealable Felt, In Order To Ensure The Tightness Of The Roof And Protect The Insulating Layer Against Moisture. The Scope Of Work Will Also Include All Necessary Accompanying Works, Such As: Preparation Of The Substrate, Dismantling Of Existing Layers Of Insulation, Installation Of New Layers Of Heat-Sealable Felt, Sheet Metal Work Around The Edges Of The Roof, Chimneys And Other Protruding Elements, As Well As Sealing. At Connections With Attics And Gable Walls; 3) Modernization Of External Walls By Insulating Them With A Thermal Layer. Due To The Location Of The Facility In An Area Entered In The Provincial Register Of Monuments, The Planned Wall Insulation Will Be Implemented In The Form Of A 5 Cm Thick Thermal Insulation Plaster, Which Will Improve The Thermal Parameters Of The Partition Without Disturbing The Aesthetic And Architectural Values Of The Building Limiting Heat Energy Losses While Maintaining The Historical Character Of The Façade; 4) The Scope Of The Investment Will Also Include The Execution Of All Accompanying Works Necessary For The Proper Implementation Of Insulation, Including Preparation And Cleaning Of The Ground, Filling Masonry Defects, Making Bonding Layers, Installing Reinforcing Mesh, Making Finishing Layers Of Plaster And Sheet Metal Work And Architectural Details In A Manner Consistent With Conservation Recommendations; Insulation, Meeting Current Technical Requirements (Required U-Value For New Joinery: 0.900 W/(M2∙K), Required Type Of Joinery: Tight Joinery (0.5 < A < 1)). The Scope Of The Investment Will Also Include The Execution Of All Accompanying Works Related To The Installation, Such As Processing Window Openings, Sealing, Repainting And Restoring Finishing Layers Around The Newly Installed Windows;6) Installation Of A Photovoltaic Installation With A Power Of 20 Kw With An Energy Storage Facility. The Project Includes The Construction Of A Photovoltaic Micro-Installation Consisting Of 45 Modules, The Use Of Which Will Be Aimed At Partially Covering The Demand For Electricity Necessary To Power The Receivers In The Building. This Solution Will Significantly Reduce The Operating Costs Of The Facilities, Increase The Investors Energy Independence And Reduce The Emission Of Pollutants Related To The Production Of Electricity From Conventional Fuels 13.8 Kwh And A Power Of 5 Kw, Which Will Enable The Accumulation Of Surpluses Of Electricity Produced In Periods Of Its