Bids Are Invited For Acquisition Of 02 (Two) Tractor Implements, 01 (One) Articulated Hydraulic Brushcutter And 01 (One) Sweeping Weeder, To Meet The Demands Of The Municipal Environment Department Of São Pedro Dos Ferros/Mg.

Sweeping Weeder For Tractor Sweeping Weeder For 4X4 Tractor: Rotating Equipment Intended For Cleaning Highways, Paved Streets, Curbs, Parking Lots, Sidewalks, Internal Roads, Public Areas And Industries, With The Removal Of Urban/Rural Debris And Solid Waste. Compatible With 4X4 Tractors From 30 To 75 Hp (Category I/Ii); Minimum Cutting Width 800 Mm; Minimum Transport Width 1,700 Mm; Minimum Transport Length 1,960 Mm; Minimum Transport Height 1,200 Mm; Maximum Operating Weight 230 Kg; Working Speed ​​2.5 Km/H (Minimum); Pump Pressure 4.1 Bar; Pump Voltage 12 V; Water Reservoir Capacity 100 L; Tdp 540 Rpm; Number Of Bristles Minimum 20; Rotor With Special Tempered Steel Bristles (Minimum Diameter 254 Mm, Resistance To Impacts And Uniform Wear); Dust Suppression System With Integrated Water Jet Forming Humidity Curtain (Minimum Flow 20 L/Min, Quick Connection To Tractor Pump); Directional Guide Wheel For Precise Control And Alignment; Protection Cover For Access And Changing Bristles; Accessories Included: Complete Set Of Spare Bristles For 1St Change; 3-Point Coupling (Standard Iso 730) With Hydraulic Lifting/Lowering System. New Equipment, Minimum 12 Month Warranty, Inmetro/Iso 9001 Certification For Rotating And Hydraulic Components., Side Articulated Hydraulic Brushcutter For Tractor Side Articulated Hydraulic Brushcutter For Tractor: Equipment For Heavy Mowing On Roadsides, Firebreaks, Embankments, Fences And Highways. Cutting Width 1.50 M (Optional Rotary 1.40 M); 3-Point Coupling Category Ii; Tdp Drive 540 Rpm With Hydraulic System And Independent Relief Valves Per Circuit (Overload Protection); Minimum 2 Hammer Tempered Knives (Rot. Knives 1,500 Rpm); Mechanical Control By Cables Or Hydraulic Joystick (Articulation Angle 90°); Adjustable Splints For Adapting To Tractors; Operating Weight 1,000-1,100 Kg; Minimum Cutting Height 20 Mm; Working Speed ​​3-7 Km/H; Hydraulic Capacity 150-180 L. New Equipment, Inmetro Certification For Hydraulic System.