It Has An Integrated Service For Use In Polyethylene (Hdpe) Pipes, With The Following Characteristics: Material: Body And Coupling Nut In Polypropylene, Lock Claw In Polyacetal And Sealing Element In Nitrile Rubber Between 50 And 70 Shore, Internal Coating With Sandpaper Or Rubber Sheet, Cutting Tool Must Be Monolithic, Manufactured From A Single Material, In Brass Or Stainless Steel, With Minimum External Diameter Of 12 Mm And With Fitting For Hexagonal Shaped Operation Wrench Suitable For 10 Mm Hexagonal Wrench, Color: Black, Connection Type: 63 Mm Tube Bags And Output Mechanical Joint Dn 20 Mm, Angle: 90 Degrees, Working Pressure: Pn 16, Manufacturing: According To Abnt Nbr 15802 2) From: 250Mm; 3) Pressure Class: Pn 16; 4) Standard Dimension Ratio: Sdr 11; 5) Manufacturing: According To Nbr 15,593; 6) Note 1: Must Be Supplied In Reinforced Plastic Packaging And Label With Identification, Code And Description. 7) Note 2: Minimum Warranty Of 12 (Twelve) Months For Manufacturing Defects. Concentric Reduction Weldable High Density Electrofusion Polyethylene With The Following Characteristics: 1) Material: Manufactured With Resin Type Pe 100; 2) Of: 90 X 63Mm; 3) Pressure Class: Pn 16; 4) Standard Dimension Ratio: Sdr 11; 5) Manufacturing: According To Nbr 15,593; 6) Note 1: Must Be Supplied In Reinforced Plastic Packaging And Label With Identification, Weldable 90º Curve Electrofusion High-Density Polyethylene With The Following Characteristics: 1) Material: Made With Resin Type Pe 100; 2) From: 63Mm; 3) Pressure Class: Pn 16; 4) Standard Dimension Ratio: Sdr 11; 5) Manufacturing: According To Nbr 15,593; 6) Note 1: Must Be Supplied In Reinforced Plastic Packaging And Label With Identification, 10/04/2026 - 11:58:43, 90º Curve Weldable High-Density Electrofusion Polyethylene With The Following Characteristics: 1) Material Made With Resin Type Pe 100, 2) 110 Mm, 3) Class Pressure Pn 16, 4) Standard Dimension Ratio Sdr 11, 5) Manufactured In Accordance With Nbr 15,593, 6) Note 1: Must Be Supplied In Reinforced Plastic Packaging And Label With Identification, Code And Description. 7) Note 2: Minimum Warranty Of Twelve Months For Manufacturing Defect., Loose Flange In Carbon Steel, Pn 10/16, Flat Gasket For Sealing, According To Nbr 7675, With The Following Features: 1) Material: Made With Carbon Steel; 2) Dn: 63 Mm; 3) D1: 165 Mm (External Diameter); 4) D2: 78 Mm (Internal Diameter); 5) Dk: 125 Mm (Measurement Between Flanges); 6) D: 18 Mm (Hole Diameter); 7) B: 16 Mm (Thickness); 8) The Flange Must Be Accompanied By Respective Accessories With The Following Characteristics: Composition: Screws, Nuts, Washers And Seal; Application: Use On Flange Dn 63 Mm, Nbr 7675; Hexagon Bolts And Nuts, According To Astm A153 Class C; Material: Screws, Nuts And Washers In Steel With Bichromated Or Phosphated Zinc Treatment, 1/8 Or 3 Mm Nitrile Rubber Sealing Washer; Screw Dimension: Diameter M16 And Length 90 Mm, With The Following Characteristics: 1) Material: Made With Carbon Steel; 2) Dn: 90 Mm; 3) D1: 194 Mm (External Diameter); 4) D2: 108 Mm (Internal Diameter); 5) Dk: 154 Mm (Measurement Between Flanges); 6) D: 18 Mm (Hole Diameter); 7) B: 16 Mm (Thickness); 8) The Flange
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
