Request For Quotation Purchase Of Consumables, Household And Construction Goods

General Construction Cement Grade Pc 400-D20. Characteristics: Type - Portland Cement With A Content Of Mineral Additives (Slag) From 6% To 20%; Strength Class - 32.5; Hardening Speed - Normal Hardening (N); Purpose - Preparation Of Mortars And Concrete For Installing Curbstones (Curbs), Laying Foundations And Landscaping Areas; Ultimate Compressive Strength After 28 Days - Not Less Than 39.2 Mpa; Setting Time: Start No Earlier Than 45 Minutes, End No Later Than 10 Hours. Additional Requirements: The Cement Must Be Homogeneous, Without Lumps Or Traces Of Moisture. Packaging: Multilayer Paper Bags Of 50 Kg. Each Package Must Be Clearly Marked: Manufacturer, Production Date, Batch Number And Gost 31108-2020 Designation. Shelf Life: Remaining Shelf Life At The Time Of Delivery Is At Least 90% Of The Total Shelf Life., Secateurs. Purpose - For Branches. Length, Cm - 20. Blade Material - Steel. Handle Material - Rubber. Working Diameter, Mm - 20. Product Compliance With Gost 12.2.118-88 (St Sev 5932-87) System Of Labor Safety Standards. Scissors. Safety Requirements. Warranty - 3 Months From The Date Of Signing The Invoice On Acceptance Of The Goods., Lightweight Safety Glasses With Adjustable Frames. Mandatory: 1) The Arms Are Adjustable In Length And Angle; 2) Anti-Fog Coating; 3) Anti-Scratch Coating. Characteristics: Lens: Polycarbonate, Transparent With Protective Coatings (Anti-Fog And Anti-Scratch). Frame And Temples: Polyamide. Optical Class: 1. Lens Color Is Clear, Frame Color Is Blue. Type: Open With Ventilation. Compliance With Gost 12.4.253-2013 System Of Occupational Safety Standards. Personal Eye Protection. General Technical Requirements. Safety Requirements. Warranty - 3 Months From The Date Of Signing The Invoice On Acceptance Of The Goods., Non-Woven Covering Material (White, Density Not Less Than 60 Uv). The Supplied Product Must Be A White Non-Woven Polypropylene Fabric (Spunbond), Intended For Agricultural Needs, With A Density Of At Least 60 G/M². The Material Must Comply With The Requirements Of Current Standards For Non-Woven Polypropylene Fabrics (Gost En 13249-2015 Or Equivalent According To The Manufacturer’S Specifications). Mandatory Content Of A Uv Stabilizer (Uv Protection) In The Composition Of The Material To Prevent Destruction Under The Influence Of Direct Sunlight And Ensure Long-Term Service Life. The Release Form Is A Roll 3.2 Meters Wide When Folded (Folded, The Roll Is 1.6 Meters Wide). The Length Of The Fabric In One Roll Is 200 Linear Meters. The Material Must Have Uniform Density Over The Entire Area, High Light Transmittance, Air And Water Permeability. The Surface Of The Canvas Must Be Uniform, Without Tears, Holes Or Foreign Inclusions. The Edges Must Be Trimmed Evenly. Each Roll Must Be Packaged In Protective Film And Provided With A Marking Label Indicating The Name, Density (60 G/M²), Actual Dimensions (3.2 M X 200 M), Net/Gross Weight And Manufacturers Data., The Mini Type Paint Roller Assembled With A Handle Is Designed For High-Quality Application Of Paints And Varnishes On Small, Narrow And Hard-To-Reach Surfaces. The Design Of The Product Is Clasp, With A Curved Clasp With A Diameter Of 6 Mm. The Working Roller Has A Length Of 50 Mm And A Diameter Of 15 Mm. The Coat Material Is High-Quality Polyacrylic With A Pile Height Of At Least 8 Mm, Which Is Resistant To Solvents And Provides Uniform Coverage Without The Formation Of Smudges And Pile Loss. The Roller Handle Is Made Of Impact-Resistant Plastic And Is Removable. A Mandatory Design Requirement Is The Passage Of The Handle Rod Along The Entire Length Of The Roller With Fixation By An End Nut, Which Guarantees The Stability Of The Roller During Operation And Prevents It From Slipping. The Product Must Fully Comply With The Requirements Of St Rk 3622-2020 “Paint Rollers. Technical Conditions. The Supplier Is Obliged To Guarantee The Absence Of Mechanical Damage And The Free Rotation Of The Roller On The Clasp., Spark Plug Vm6a For 2-Stroke Engines In A Blister, Technical Characteristics Of Vm6a: Thread Length: 9.5Mm. Thread: M14*1.25Mm. Key: Hexagon 19 Mm. Heating Number: 6. Gap Between Electrodes: 0.6 Mm. Size19 Mm. Compliance With Gost 31742-2012 Gasoline Chain Saws. Safety Requirements. Test Methods. Product Warranty Is 3 Months., Pointed Bayonet Shovel (Blade) Without Stiffeners, Master Series, Without Handle. Characteristics: Made Of High-Quality Carbon Steel St3 Grade 1.5 Mm Thick; The Hardness Of Steel After Heat Treatment Is 35-40 Hrc; Coating: Protective Anti-Corrosion Powder Coating; The Size Of The Working Part Is 285X210 Mm; Tuleyka Parameters: Length - 110 Mm, Diameter - 40 Mm; Application: For Gardening And Construction Work; Features - The Absence Of Stiffeners Prevents The Sticking Of Viscous Soil. Product Compliance: Gost 19596-87 Shovels, Forks And Rakes. Technical Conditions. Product Warranty - 6 Months., Saw Chain. Characteristics: Carbide Cutting Teeth - Chisel; Tire Length - 50 Cm (20 Inches); Number Of Chain Links - 76 Pcs.; Chain Pitch - 0.325; Groove Width - 1.5 Mm; Compatibility: Pbc-M49-45, Pbc-M52-45, Pbc-M62-50; Tensile Strength; Strong Connection Of Links; Minimal Noise Level; Long Service Life; Sharp Factory Sharpening; Uniform Distribution Of Lubricating Oil Along The Entire Length. Product Compliance With Gost 31742-2012 Petrol Chain Saws. Safety Requirements. Test Methods. Warranty - 3 Months From The Date Of Signing The Delivery Note., Motor Oil 2T, For Two-Stroke Air-Cooled Gasoline Engines, Bottled In Manufacturers Containers. 1 Liter Containers. Compliance With St Rk Gost R 51634-2008 Automotive Motor Oils General Technical Requirements. Guarantee 6 Months From The Moment Of Signing The Act Of Acceptance And Transfer Of Goods., Extendable Metal Fan Rake. Characteristics: Number Of Teeth - 15; Material: Galvanized Spring Steel For Corrosion Protection; Design - A Sliding Mechanism With A Lock Allows You To Adjust The Width Of The Working Part; Handle - Included, Premium Grade Birch, 20-25 Mm In Diameter, Carefully Polished; Application - For Cleaning Leaves, Mown Grass And Garden Waste; Season: Spring-Autumn. Additionally: It Has High Tooth Elasticity And Low Weight. Product Compliance: Gost R 51641-2000 “Gardening Tools. Rake. General Technical Conditions (In Terms Of General Requirements For Design And Materials). Product Warranty - 6 Months., Original Spark Plug For Trimmer Stihl - L6tc. Main Characteristics - 2-Stroke Spark Plug; Dimensions: M14*1.25 9.5 Mm. Product Compliance With Gost R 53842-2010 Automotive Engines. Spark Plugs. Technical Requirements And Test Methods. Product Warranty Is 3 Months., Raincoat With Zipper. Characteristics: The Seams Are Stitched With Threads And Folded Twice To Protect Them From Getting Wet; Gender - Unisex; Fastener Type: Zipper; The Hood Is Non-Removable; Additionally: Patch Pockets; Season - Spring-Summer; Sizes: Xl/2Xl/3Xl. Height: From 158 To 164, From 170 To 176. Color - Green; Composition: High Pressure Polyethylene With A Density Of At Least 18 Microns. Packaging: Pe Bag With Paper Insert. Product Conformity Interstate Standard Gost En 343-2021 System Of Occupational Safety Standards. Special Clothing For Protection From Rain. Technical Requirements And Test Methods., Sprayer Op-207 Classic (10 Liters). Technical Characteristics: Control Type - Manual (Mechanical); Method Of Creating Pressure - Pump (Pneumatic); Tank Volume (Full) - At Least 10 Liters; Working Volume Of Liquid - Not Less Than 8.5 L; Fire Nozzle Type - Telescopic, Aluminum; Fire Nozzle Length - Adjustable, From 650 To 970 Mm With Adjustable Watering (Dense Stream) And Spraying (Saturated Fog); Working Pressure - Not Less Than 0.23 Mpa (2.3 Bar); Tank Material - High-Strength Polyethylene/Plastic With One-Piece Filler Funnel And Scale; Carrying Type - Shoulder Strap With Length Adjustment; Safety - Availability Of A Safety Valve To Relieve Pressure; Fluid Flow - From 0.6 To 0.8 L/Min. Equipment: Tank, Pump Assembly, Telescopic Fire Nozzle, Hose, Belt, Instruction Manual In Kazakh And Russian. Compliance With Gost 22999-88 “Portable Sprayers With Manual Drive. General Technical Conditions. The Warranty Period Is 3 Months From The Date Of Signing The Bill Of Lading And Acceptance Of The Goods.