Request For Quotation Purchase Of Electrical Materials And Components

Disconnector Rlnd-10Kv 400A, Rated Voltage Kv 6-10, Highest Operating Voltage Kv12, Rated Current A 400, Endurance: For Grounding Blades For 1S Ka10, For Main Blades For 3S Ka10, Highest Peak Rated Short-Term Withstand Current (Electrodynamic Withstand Current) Ka25, Length Leakage Paths Of External Insulation, Not Less Than Cm 30, Permissible Mechanical Load On The Terminals Taking Into Account The Influence Of Wind And Ice, Not Less Than N 200, Electrical Resistance Of The Main Circuit Ohm 175×10-6, Maximum Force Applied To The Drive With The Length Of The Operating Handle Together With The Extension No More Than 10 M N 245, Weight, Not More Than Kg 38, Overall Dimensions Mm 1200X470x385. The Supplier Is Obliged To Agree On This Product With The Customer. If The Goods Do Not Meet The Customers Requirements, The Customer Has The Right To Refuse To Accept The Goods. St-Kz, Type: Wedge Tension Clamp, Brand: Nk-1, Range Of Wire Sections: From 16 To 95 Mm², Breaking Load: Not Less Than 40 Kn, Case Material: Steel (With Anti-Corrosion Coating), Wedge Material: Aluminum Alloy / Brass. The Supplier Is Obliged To Agree On This Product With The Customer. If The Goods Do Not Meet The Customers Requirements, The Customer Has The Right To Refuse To Accept The Goods. St-Kz, Steel Wire Rod 6.5Mm. Before Sending The Goods, The Supplier Is Obliged To Agree On The Goods With The Customer. If The Goods Do Not Meet The Customers Requirements, The Customer Has The Right To Refuse To Accept The Goods. St-Kz, Grease Tsiatim-203, Appearance - Homogeneous Ointment Of Dark Brown Or Green-Brown Color. Dropping Point - Not Lower Than 160 ° C. Effective Viscosity: At 50°C And An Average Strain Rate Gradient Of 1000 S-1 - At Least 1 Pa S; At -30°C And An Average Strain Rate Gradient Of 10 S-1 - No More Than 1000 Pa S. Tensile Strength At 50°C - Not Less Than 250 Pa. Colloidal Stability - No More Than 10%. Stability Against Oxidation (Mg Koh Per 1 G Of Lubricant) - No More Than 3.0. The Mass Fraction Of Free Alkali In Terms Of Naoh Is No More Than 0.1%. Mass Fraction Of Sulfur - Not Less Than 0.2%. Penetration At 25°C - 25–300. , The Supplier Is Obliged To Agree On This Product With The Customer. If The Goods Do Not Meet The Customers Requirements, The Customer Has The Right To Refuse To Accept The Goods. St-Kz