Tenders Are Invited For Purchase Of 2,000,000/Two Million Printed Electronic Plastic Cards

Tenders are invited for Guaranteed Purchase of 2,000,000/Two Million Printed Electronic Plastic Cards, Provided that the Offer Sent by You is Included. The Syrian Federation of Insurance Companies wishes to solicit technical and financial offers to insure the purchase of 2,000,000 two million printed plastic electronic cards. The offer sent by you must include (the technical offer, the financial offer) and be delivered to the Federation headquarters by hand and in a sealed envelope to the reception department no later than the end of working hours on Thursday, April 16, 2026, according to the specifications and notes shown below. Technical Specifications: - Material: New, non-repeatable, first-class glossy PVC, unbreakable when bent, consisting of a single homogeneous layer. - Colors: Four colors for the front side + four colors for the back side (in the CMYK primary color range) according to the design, with serial numbers and a blank space for printing a barcode according to the design. - Dimensions: 85.5 mm x 54 mm / Thickness: 0.76 mm. - Symbolic Union logo thermally integrated with the card (gold-colored stamp). - Lamination layer over the gold stamp to prevent scratches, protect the logo, and ensure printer safety. - Glossy layer on both sides of the card, specifically for use with thermal printers. This layer is suitable for printing Union-specific information on it . - The card withstands heat and humidity after applying a virtual test environment from 35°C ± 3°C to 50°C and relative humidity from 5% to 95%. - The normal protrusion edge does not exceed 0.08 mm for the edges and 0.003 mm above the card surface. The card surface must be free of defects and static electricity. The card must conform to international standards (ISO 7813 ISO 7810) and meet global specifications . The card must have a printed serial number according to the attached template and design. The union will provide the start and end sequences, and this sequence must be stated on the main packaging carton. The factory name must be stated on both the outer and inner cartons. The supplier must provide a copy of the factorys certificate of origin and a list of projects implemented by the factory within the country. This will be verified through the submitted lists. The factory must hold an ISO quality certificate and provide proof of this. The supplier must be a distributor for the factory and provide proof of this. [Disclaimer: The above text is machine translated. For accurate information kindly refer the original document.] Tender Link : elan.gov.sy