Tenders Are Invited For Three-Layer Surface Consolidation Of The Surface On District Road No. 1937N On The Lisewo - Jędrzejki Section

1. The Subject Of The Order The Subject Of The Order Is The Performance Of The Task Titled: Three-Layer Surface Consolidation Of The Surface On The District Road No. 1937N On The Lisewo And Jędrzejki Section. General Characteristics Of The Works To Be Performed As Part Of The Task: - Leveling The Existing Subgrade With Crushed Aggregate 0/31.5 Mm Mechanically Stabilized With A Layer With A Diameter Of Gr. Up To 10 Cm, Taking Into Account The Required Horizontal And Vertical Slopes At Km 4+264 - 5+084 With A Length Of 0.820 Km And A Width Of 5.5 M - Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Crushed Basalt Grit For Road Surfaces With Dimensions 2-5 Mm At Km 4+264 - 5+084 With A Length Of 0.820 Km And A Width Of 4.0 M - Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Crushed Stones For Road Surfaces With Dimensions 5-11 Mm At Km 4+264 - 5+084 With A Length Of 0.820 Km And A Width Of 4.0 M - Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Crushed Stones For Road Surfaces With Dimensions 11-16 Mm At Km 4+264 - 5+084 With A Length Of 0.820 Km And A Width Of 4.0 M. The Ordering Party Reserves The Right To Invalidate The Contract Award Procedure If The Funds That The Ordering Party Intends To Allocate To Finance Part Of The Order Are Not Granted To It. A Detailed Description Of The Subject Of The Order Includes: - Bill Of Quantities, - Detailed Technical Specifications. The Bill Of Quantities Is An Example. The Attached Bill Of Quantities (Annex No. 9 To The Swz) Specifies The Approximate Scope Of Works To Be Performed To Complete The Order, Thus Making It Easier To Calculate The Price. The Contractor Should Analyze The Attached Bill Of Quantities, Detailed Technical Specifications And Prepare A Price Offer Based On His Own Analysis. If The Specification Of The Order Conditions Would Indicate, In Relation To Certain Materials Or Devices, Trademarks, Patents Or The Origin, Source Or Specific Process That Characterizes The Products Or Services Provided By A Specific Contractor - The Ordering Party, In Accordance With Art. 99 Section 1 Point 5 Of The Public Procurement Law Allows Offering Equivalent Materials Or Devices. Materials Or Devices From Specific Manufacturers Determine The Minimum Quality Parameters And Functional Features That The Materials Or Devices Offered By The Contractor Must Meet In Order To Meet The Requirements Set By The Ordering Party. Materials Or Devices From Specific Manufacturers Constitute Only A Quality Standard Of The Subject Of The Order. The Term Minimum Quality Parameters And Functional Features Means That The Ordering Party Understands The Requirements For Materials Or Devices Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. The Use Of Manufacturer/Product Names Is For Example Purposes Only