Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Road Signage Materials, Including Signs, Paints, Cones, Easels, Zebra Stripes And Other Related Accessories, Aiming To Meet The Agencys Operational Demands On An Ongoing Basis And As Needed

Plates In Aluminum Composite Material (Acm) Of 3Mm, According To Nbr Abnt 16.179, Of Regulation And Warning Of Various Sizes, With Sign Printed On Retroreflective Film Known Commercially As Grade Engineering Prismatic Item Type I Abnt 14.644:2013, With Durability Of 07 Years, Consisting Of Microprisms, Allowing The Same Color To Be Observed During The Day And At Night When Observed In Natural Light And A Vehicles Headlights. It Must Meet The Specifications In The Table Below With Regard To Retroreflection And A Transparent Film Must Be Applied To The Signal For Protection Against Uv, Known Commercially As Overlay. The Inks Used In The Digital Printing Process Must Be From The Same Manufacturer As The Film To Ensure That The Durability Of The Printed Sign Is The Same As Specified. The Sign Manufacturer Must Present A Letter Of Guarantee From The Film And Paint Manufacturer Proving That Its Construction Complies With The Specification. The Films Used To Produce The Printed Signs Must Be Weather Resistant And Have An Adhesive Protected By An Easy-To-Remove Film., Support For Installing Ground Plates 2.1/2X3000 Galvanized Pp Post With Anti-Rotation Cover, Clamps For Installing Galvanized Ground Plates With Set Of Measuring Screws 400Mm., Support For Installing Floor Plates Made With Eucalyptus Wood, Sawn, Equipped And Duly Treated With Water-Soluble Protective Material In An Autoclave Under Vacuum And High Pressure, In Accordance With The Provisions Of Law No. 4797 Of 10/20/1965 And Decree No. 58,016 Of 03/18/1966, Black Painting. They Must Have A Retention And Penetration Index Of 6.5 Kg Of Protective Material Per M³ Of Wood, In Accordance With Nbr 6232(1). The Pieces Must Have A Square Section Of 0.10 M The Fastening System Consisting Of Screws, Washers, Nuts And Other Metal Elements Must Be Made Of Sae 1008/1020 Carbon Steel, Clean, Free From Oil, Grease, Salts Or Rust. The Posts Must Be Painted In Two Coats, With Chlorinated Rubber-Based Paint Or Synthetic Enamel In White. The Fastening System, Screws, Washers, Nuts And Other Metallic Elements Must Be Galvanized Internally And Externally, With A Minimum Zinc Deposition Of 350 G/M², In A Minimum Thickness Of 50 Microns, According To Nbr 7397., Vr Seal Made Of Galvanized Steel Width: 12.7 ½ Mm, Suitable For Plate Fixation On Electrical Pole., Strap (Arching Tape) Made Of Galvanized Steel Width: 12, Roll Of 30 Meters., Bracket Type Plate Support, Ref. Spb-19., Set Of 2 1/2 Clamps, 400 Mm, Hot Galvanized, In Kit With Nuts, Screws And Washers., Base Paint Of Acrylic Resin White Color Dersa Standard Standard / Op-06-21 Detailed Description: Acrylic Resin Based Paint For Pavement Demarcation, In White Color Munsell Code 9.5 According To Standard Op - 06 – 21 Of Dersa Sp Desenvolvimento Rodoviário S/A Of The State Of São Paulo, Proven Through Material Quality Certificate Issued By Official Laboratory. The Product Must Be Packaged In. 18-Liter Bucket, With The Name Of The Manufacturer On The Label; Chemical Reference Of The Resin;