Bids Are Invited For Price Registration For Acquisition Of Network Assets (Manageable Switches), To Meet The Needs Of The Municipality Of The Tourist Resort Of Olímpia/Sp.

24 Gigabit Switch (L2+ Or L3 Light) Ports According To Minimum Specifications 1 Minimum Technical Characteristics: 1.1 Gigabit Ethernet Switch Type Equipment With Layer 3 Operation Capability Of The Osi Model; 1.2 Must Be Provided With 24 (Twenty-Four) 100/1000Base-T Ports, Rj-45 Connectors Provided Directly On The Equipment; 1.4 Must Have 24 Simultaneously Active Ethernet Ports, Not Including Stacking Interfaces; 1.3 Must Have Console Port For Full Local Management, With Rs-232, Rj-45 Or Usb Connector; 1.4 The Equipment Must Allow Automatic Configuration Based On Other Equipment On The Network, Without Human Intervention, Allowing Rapid Replacement Of The Equipment. When Turned On, The Equipment Must Search For This Configuration On Other Equipment On The Network, Using Parameters Provided By Dhcp; 1.5 It Must Have A Jumbo Frame Of At Least 9000 Bytes; 1.6 Must Have Mac Table With Support For 16,000 Addresses 1.7 Must Be Provided With Installed Capacity To Operate In Compliance With The Ieee 802.1Q Standard, For Creation Of Virtual Networks 1.8 Must Allow Traffic Mirroring From One Port To Another Port On The Same Switch And Another Switch On The Network (Port Mirroring); 1.9 Must Have Lldp Functionality According To The Ieee 802.1Ab Standard, Which Allows Self-Discovery Of The Equipment Connected To The Switch Port. Detection Of Connected Equipment Must Occur Automatically; 1.10 Must Have Igmp Snooping; 1.11 Must Automatically Identify Ports To Which Ip Phones Are Connected And Automatically Associate Them To Voice Vlan; 1.12 Must Have Standard Spanning Tree Ieee 802.1W (Rapid Spanning Tree), Ieee 802.1S (Multiple Spanning Tree) With Bpdu Filters And Spanning Tree Per Vlan. Must Implement At Least 32 Instances; 1.13 Must Have Packet Prioritization (Qos) With 4 Priority Queues Per Port. Must Implement Packet Classification Based On Acl Rules; 1.14 Must Have Authentication, Gigabit Switch 24 (L2+ Or L3 Light) Ports + Ssp 4 10Gb Stackable According To Minimum Specifications Minimum Technical Characteristics: 1.1 Type Of Equipment: High Performance Ethernet Switch, With Switching Capacity At Layer 2 (L2), Layer 2+ (L2+) And Static Routing At Layer 3 (L3 Lite) Osi Model. 1.2 Network Interfaces: Must Have At Least 24 (Twenty-Four) 10/100/1000Base-T Ports With Rj-45 Connectors Integrated Into The Chassis. 1.3 Additional Ports And Uplink: It Must Have, In Addition To The Gigabit Ports, At Least 04 (Four) 10 Gbps Sfp+ Slots For High-Speed ​​Uplink, Supporting Simultaneous Operation With The Other Ports. 1.4 Active Ports And Stacking: The Equipment Must Support 24 Active Ethernet Ports Simultaneously. Must Have Physical Stacking Capacity For Simplified Management And Redundancy. 1.5 Local Management Interface: Must Have Dedicated Console Port For Local Management Via Cli, With Standard Rj-45 Or Micro-Usb Connector. 1.6 Automatic Provisioning (Ztp): Must Allow Automatic Configuration (Zero Touch Provisioning) Based On Parameters Provided By Dhcp Server Or Through Centralized Cloud/Local Management Platform, Allowing Hardware Replacement Without Manual Intervention In Configurations. 1.7 Forwarding Capacity: Support Jumbo Frames Of At Least 9000 Bytes. 1.8 Addressing Table: Mac Table With Minimum Support For 16,000 Addresses. 1.9 Virtual Networks