1.1. Glue Vk-3 Ost 1 90281-86 Is Intended For Gluing Metals And Non-Metallic Materials, Including Honeycomb Structures, As Well As For The Production Of Film Phenolic Rubber Adhesive Of The Same Brand. Operating Temperature Range From Minus 60 To Plus 80 0C. 2. Requirements For The Supplied Goods Name Parameter Appearance Viscous Liquid From Gray To Light Brown Color Without Foreign Impurities Or Lumps Viability, H 6-24 Ultimate Shear Strength Of Adhesive Joints Made Of Clad Aluminum Alloy D16at, Mpa At A Temperature Of 20 °C 16.66 At A Temperature Of 80 °C 10.78 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Vk-3 Glue Must Be Category 1, Produced In The Manufacturer’S Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Assigned Shelf Life. Metal Containers For Pouring Containers., 1.1. Sealing Mastic Gost 18680-73 Is Used For Sealing Devices, Components And Assemblies For Sealing Control Sockets Of Radio-Electronic Equipment, Units Of Electrical Machines, Household Appliances, Etc. 2. Requirements For The Supplied Goods. 2.1. Mastic Is Made On The Basis Of Petroleum Bitumen, Plasticizing Resin And Mineral Filler. In Mastics It Is Used In A Form Heated To A Plastic State. The Softening Temperature Of Bitumen Mastics Is From 70 To 800C. Heated Bitumen Sealing Mastic Is Poured Into The Sealing Areas And The Stamp Is Pressed. The Operating Temperature Range Of The Mastic Is From -60 To +1000C. 2.2. The Mastic Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor; K52-1-70-47 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., 1.1. Waxed Linen Thread Mackay Gost 14961-91 Is Intended For Beading Wires Of The On-Board Electrical Network. Breaking Load – Not Less Than 25 Kgf. Coating – 100% Natural Wax. Diameter – 1.5 Mm. 2. Requirements For The Supplied Goods. 2.1. Waxed Linen Thread Mackay Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Product Must Be Category 1, Supplied In The Manufacturers Packaging, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture)., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor; K52-1-68-50 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor K52-1-100-33; 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor K52-2-400-15 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner.
