Bids Are Invited For Srp For The Future And Possible Acquisition Of A Hydraulic Submerged Pump And Rotary Saw, According To The Etp And Terms Of Reference Attached To The Records. Did Nº 2024/2026

Pump - Submersible Hydraulic Pump 3000 L/Min Application: - For Draining Trenches With The Following Characteristics; - Max Length Of 490 Mm X Maximum Width Of 400 Mm And Weight Between 25 And 27 Kg; -Should It Repress Clean And Dirty Liquids As Well As Suspended Solids Of Up To 4?; - Have A 4” Hose Outlet; - Minimum Holding Capacity Of 3000 Liters Per Minute At A Minimum Height Of 3 Meters Without Considering Pressure Loss; - The Hydraulic System Must Withstand A Maximum Pressure Of 140 Bar At A Flow Rate Of 30 Litres/Min; - Should The Connections Be Of The Type Of Quick Couplers, Flat Face Rotating, With A Diameter Of 3/8? With Anti-Drip System - They Must Have A Protective Cover For Quick Coupling Made Of Material Resistant To Hydraulic Oil - The Original Technical Catalog From The Manufacturer Must Be Presented With The Characteristics Of The Model Offered., Saw - Hydraulic Rotary Saw With Trolley Application: - Cutting Floors, Walls And Structures With Diamond Disc; Cutting Metal Bars, Plates And Other Metal Parts With An Abrasive Cutting Disc. Additional Information - Driven By A 30 Lpm Hydraulic Circuit At 140 Bar - 5,000 Rpm Rotation; - Saw Installed On Trolley With Saw Height Adjustment And Water Storage Compartment. -Saw Can Be Uninstalled From Cart For Manual Work. - Disc Capacity 14? With Hole For Axis 1?; - Oil For Petroleum-Based Hydraulic Systems That Operate Under Severe Pressure And Temperature Conditions, Using Grade Iso32, Whose Viscosity At 40°C Is 30.2 Cst; - With Anti-Corrosion, Anti-Wear, Anti-Foam, Anti-Rust, Antioxidant And Pour Point Lowering Additives; -The Saw Input And Output Connections Are Equipped With A Pair Of Hydraulic Hoses With Quick Couplings With Adequate Working Pressure In Relation To The Hydraulic Unit, With A Minimum Length Of 500 Mm, With The Input Connection Being Female And The Output Connection Being Male And Enabling Manual Connection Without The Use Of Tools; - Should The Connections Be Of The Type Of Quick Couplers, Flat Face Rotating, With A Diameter Of 3/8? With Anti-Drip System In Accordance With Norm 16028 And American Norm Htma Standard, Equipped With Check Valve On Both Sides Allowing Free Passage Of The Fluid Without Occurring Leakage Or Air Entry Into The Circuit; - The Manufacturers Original Technical Catalog Must Be Presented With The Characteristics Of The Model Offered., 09/04/2026 - 15:48:11