Bids Are Invited For Civil Infrastructure And Land Stabilization Works

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Mechanized Cleaning Of Plant Layer, Vegetation And Small Trees (Trunk Diameter Less Than 0.20 M), Using A Tracked Tractor. Af_03/2024, Surface Regularization With Motor Grader. Af_09/2024, Surveyor With Additional Charges, Mechanical Excavation. Open Field On Land Except Rock Up To 2M, 04/09/2026 - 15:51:06, 04/09/2026 - 15:51:44, 04/09/2026 - 15:51:53, 04/09/2026 - 15:52:04, Loading, Maneuvering And Unloading Of Soils And Granular Materials In Dump Truck 14 M³ - Loading With Hydraulic Excavator (1.20 M³ Bucket / 155 Hp) And Free Unloading (Unit: M3). Af_07/2020, Transport With 10 M³ Dump Truck, On Paved Urban Road, Dmt Up To 30 Km (Unit: M3xkm). Af_07/2020, Clay Or Clay For Embankment/Refill (With Transport Up To 10 Km), Execution And Compaction Of Final Layer Of Landfill (100% Normal Proctor Energy) With Predominantly Sandy Soil, In Layers 10 Cm Thick - Exclusive Of Excavation, Loading And Transport And Soil. Af_09/2024, Fence With Round Wooden Posts, Diameter 11Cm, Spacing Of 2.5M, Free Height Of 1.7M, Nailed 0, With 5 Strands Of Barbed Wire No. 14 Or 16 Class 250 - Supply And Installation. Af_12/2025, Structural Masonry Of Ceramic Block (19X19x39cm) Esp.19Cm, Fck15mpa Reinforced Concrete Manufactured On Site, Densified And Cast, For General Use, With Flat Shapes In 12Mm Resin Plywood (05 Uses), Chapisco Applied To Masonry And Internal Concrete Structures, With A Scoop Of Bricklayer. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Plaster Or Single Putty In Mortar Mix 1:2:8, Manual Preparation, Manually Applied To Blind Facade Panels (Without The Presence Of Gaps), Thickness Of 25 Mm. Af_09/2022, Steel Mesh Composed Of Purlins For Roofs Of Up To 2 Pitches For Structural Fiber Cement Tile, Including Vertical Transport, Exclusive Painting. Af_10/2025, Painting With Alkyd Finishing Paint (Glossy Synthetic Enamel) Applied By Roller Or Brush On A Metallic Profile Made In The Factory (By Coat). Af_01/2020