Rated Insulation Voltage (Ui) – 690 V Rated Operating Voltage (Ue) – Up To 400 V Rated Operating Current (Ie, Ac-3) – 9 A Number Of Main Contacts – 3 No Number Of Additional Contacts – 1 No Control Coil Voltage (Us) – 230 V Ac Operating Coil Voltage Range – 0.85…1.1 Us Coil Frequency – 50/60 Hz Consumption Coil Power (Switching On) – 65 Va Coil Power Consumption (Holding) – 8 Va Application Category – Ac-3 (Asynchronous Motors) Pulse Overvoltage (Uimp) – 6 Kv Additional Contact Current (Ac-15, 230 V) – 6 A Mechanical Wear Resistance – ≥ 10,000,000 Cycles Electrical Wear Resistance (Ac-3) – ≥ 1,000,000 Cycles Cross-Section Of Connected Conductors – 1…6 Mm² Degree Of Protection – Ip20 Operating Temperature – −25…+55 °С Mounting Type – Din Rail 35 Mm Housing Material – Polyamide, Self-Extinguishing Weight – 0.35 Kg Standard – Iec/En 60947-4-1, Gost R 50030.4.1, Type – Terminal Block (Stacked Clamp) Rated Current (In) – 35 A Connected Conductor Cross-Section – 0.75…4 Mm² (Copper, Solid/Stranded) Number Of Poles – 12 Poles (Sections) Housing Material – Polyamide Pa66 (Self-Extinguishing) Insulation – Yes (Polyamide Housing) Color – Gray (Ral 7035) Current-Carrying Part – Brass L63, Nickel-Plated Clamping Mechanism – Screw (Bolt Fastening) Screw – M3, Steel, Galvanized Tightening Torque – 0.5…0.6 Nm Rated Insulation Voltage (Ui) – 800 V Surge Overvoltage (Uimp) – 6 Kv Frequency – 50/60 Hz Protection Class – Ip20 Operating Temperature – −40…+105 °С (Short-Term +120 °С) Mounting Type – 35 Mm Din Rail (En 60715) Fastening – Latch (Lock) Marking – Pole Numbering 1…12 (Removable) Pole Connection – Jumpers (Jxb-Br10, Optional) Jumper Cross-Section – 4 Mm² Weight – 0.08 Kg Dimensions – 56×42×36 Mm (For 12 Poles) Standard – Iec 60947-7-1, En 60947-7-1, Gost R 50030.7-1, Ul 1059 Certificates – Ce, Ul, Rostest Application – Distribution Boards, Control Cabinets, Power Circuits, Additional Contact Block Pki-11 (1O+1Z) Attachment/Block Of Additional Contacts Light Contactor Contacts – 1 No + 1 Nc (1 Contact + 1 Contact) Contact Type – Instant Action Contact Ratings (Ue) – 690 V Ac Contact Ratings (Ie, Ac-15) – 6 A (230 V), 4 A (400 V) Ratings Of Motors (Ie, Dc-13) – 2 A (220 V) Koldanu Categories – Ac-15, Dc-13 Residential – 50/60 Hz Ratings Of Electricity (Ui) – 690 V Impulsik Kerneuge Voltage (Uimp) – 6 Kv High Contact (Ac-15, 230 V) – 6 A Mechanical – ≥ 10,000,000 Cycle Electrical – ≥ 1 000 000 Cycle Installation – Front/Side (Contactor Bekita) Contactor Rating – 0.75–2.5 Mm² (Terminal Block) Body Rating – Ip20 Temperature Range – −25…+55 °C Salmak – 0.05 Kg Standard – Iec/En 60947-5-1, Gost R 50030.5.1, Type – Cable Gland (Gland, Sealed Gland) Thread Size – Pg21 (Standard Panel Thread) Degree Of Protection – Ip54 (Dust- And Splash-Proof) Cable Clamping Range – 13-18 Mm (Outer Diameter) Housing Material – Polyamide Pa66 (Nylon) Or Nickel-Plated Brass Seal Material – Nitrile Rubber (Nbr) Or Silicone Rubber Hermetic Seal Material – Polyamide Pa66 Color – Gray (Ral 7035), Black (Ral 9005), Metal (For Brass) Design – Dismountable With Compression Seal Tightening Type – Nut With Lock (Plastic Or Metal) Tightening Force – Hand-Held (No Tools) Tightness – Ip54 (Dust And Water Splashes), Ip68 (With Additional Seal) Operating Temperature – −40…+100 °С (Nbr), −60…+200 °С (Silicone) Resistance – To Oils, Gasoline, Solvents, Alkalis, Acids, Uv Radiation Flammability – Self-Extinguishing (V0 According To Ul94) Thread Length – 10 Mm Threaded Drill Diameter – 28.3 Mm (Pg21) Assembly Height – 25 Mm Weight – 0.015 Kg (Plastic), 0.045 Kg (Brass) Standard – En 50262, Iec 62444, Gost R 51322.1 Certificates – Ce, Ul, Rostest, Ip Certificate
