1.1 Supply And Placement Of Work Sign Made Of Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On Metal Structure Of Metalon 20X20mm, Esp.1.25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, 2.1 Road Signage Project, 2.2 Engineer/Architect, Full Level, Including Additional Charges, 2.3 Topographic Location Above Fifty (50) Reference Points, Including Marking Stake, 3.1 Acrylic Resin Lines Of 0.6Mm Thickness And Width = 0.10M (Execution, Including Pre-Marking, Supply And Transport Of All Materials), 04/07/2026 - 10:39:40, 3.2 Arrows, Symbols And Wordings Made Of Acrylic Resin 0.6Mm Thick (Execution, Including Pre-Marking, 3.3 Hot Floor Demarcation With Retroreflective Extruded Thermoplastic Material, With A Minimum 3.0 Mm Thickness Wet, With Material Supply., 3.4 Elastoplastic Laminate For Horizontal Signage With A Thickness Of 1.5 Mm – Supply And Implementation, 3.5 Stripe Painting - Two-Component Cold Plastic Based On Methacrylic Resins - Thickness Of 3.0 Mm, 3.6 Shtrp Type Reflective Tack, With Catadioptric On Both Sides (Execution, Including Supply, Placement And Transport Of All Materials), 3.7 Reflective Tack Type Shtrp, With Catadioptric On Only One Side (Execution, 3.8 Reflective Tack Type Shtrg, 3.9 Reflective Tack Type Shtrg, 4.1 Carbon Steel Plate With Reflective Film Technical Grade Type I + I (Execution, Including Supply And Implementation, 4.2 Supply And Installation Of Simple Support In Carbon Steel Of Circular Section With Seam And Smooth Ends, With Buffer Diameter Ø 2 1/2 Galvanized Wall # 14 With Anti-Rotating Fins., 4.3 Support For Signage Plate In Treated Hardwood 8X8 Cm - Supply And Implementation, 4.4 Removal Of Support Set With Single Plates Or On Post., 4.5 Supply Of Support Set With Designed Arm In Carbon Steel With Hot Galvanization Of Circular Section Support Ø 4.1/2” And Arm Ø 4”, Including All Material Necessary For Its Installation., 4.6 Installation Of Support And Projected Arm., 4.7 Installation Of Aerial Plate On Designed Arm With Area Less Than 2.0 M²., 4.8 Removal Of Support And Projected Arm, With Paving Recomposition, 4.9 Removal Of Aerial Plate In Projected Arm With An Area Less Than 2, 4.10 Supply And Installation Of Street Signs, Made Of 1.25 Mm Plate, Electrostatic Painting, Royal Blue Color, With Dimensions 600 300 Mm, Letters, Stripes And Numbers In Fully Reflective Film., 4.11 Supply And Installation Of Simple Support In Circular Section Carbon Steel With Stitching And Smooth Ends, With Cap Diameter Ø 2.1/2 Painted In Glossy Black. Sizes. Supply, 5.1 Single Semi-Malleable Fender Sv-Dsm-02 (Execution, 6.1 Metallic Semi-Portico With 8.3 M Span, 35 M/S Wind And Exposure Area Of Up To 12.45 M² - Supply And Implementation - Commercial Sand And Gravel, 6.2 Metallic Gantry With Span Of 15.9 M, Wind Speed Of 35 M/S And Exhibition Area Of Up To 23.85 M² - Supply And Implementation - Commercial Sand And Gravel. Arm Designed With External Ø = 101.60Mm Minimum Wall Thickness 4.5 Mm
