Bids Are Invited For Acquisition Of Car Wash Pump, Automatic Calibrator, Manual Calibrator With Pressure Gauge, Manual Pressure Calibrator, Pneumatic Impact Wrench, Floor Cutter, Drill, Alligator Jack, Bottle Jack, Car Wash Hose, Compressor Hose, Breaker Hammer And Marble Saw To Serve The Department Of Transport And Works And Municipal Workshop

Agricultural Car Wash Spray Pump 45 Liters/Minute Minimum Technical Specifications: Spraying Rpm: 800 Suction: 30 Pressure (Kg/Cm2): 21~35 Power(Hp): 5~6 Power(Kw): 3~5 Flow: 20-45L/Min Piston: 30Mm Pulley: 10: Irrigation Rpm: 1200 Suction: 45 Pressure (Kg/Cm2): 10 Power(Hp): 5~6 Power(Kw): 3~5 Piston: O30mm Pulley: 10 Not Included Engine Recommended Oil: Sae30w40 Or 20W50 Dimensions - Width: 30.00 Cm - Height: 30.00 Cm - Length: 30.00 Cm Weight - Net Weight: 10.50 Kg, Electronic/Automatic Tire Gauge Minimum Specifications: Fast, Precise And Standardized Calibration; Armored Structure And Resistant To Different Climates; Calibration From 3 To 145 Psi; Electronic Calibrator 110/220V (Bivolt); Pressure Indication In Memory For Checking, Audible Alarm (Beep) When Calibration Is Finished; With Installation Support; Automatic Start When Engaging The Nozzle On The Tire Valve; Pressure Indication Memory For Conference; Keys (+) And (-) For Quick Pressure Adjustment; Reading In Libra (Psi) And Empty Tire Key; Flow In Pulses For Controlled Calibration; With 8 Meters Of Hose; 1 Hose Support; 1 Filling Nozzle; Works By Compressed Air Or Nitrogen; For Wall Installation., Manual Pressure Calibrator With Double Mouth - 150 Psi - Pen Type Minimum Specifications: - Measuring Range 10-150 Psi - Compatible With All Pressure Valves - Made Of Sturdy Steel - Manufactured With Stainless Steel Body And Aluminum Ruler, Manual Calibrator With Manometer Minimum Specifications: - Measurement In Psi E Bar - Operating Range: 0-220 Psi 0-16 Bar - Made Of Aluminum - Rubber Hose With Clamp Nozzle To Be Connected And Attached To The Tire To Perform Calibration. - Type: Pistol - Inflate Trigger And Pressure Relief Button - With Quick Coupling, 1 Inch Pneumatic Impact Wrench With Extended Shaft Minimum Technical Specifications: - Maximum Torque: 2,400 N.M / 244.8 Kgfm; - Approximate Air Consumption Between 8 And 10 Kg/Cm² (116-145 Psi); - Maximum Rotation Speed: 3,900 Rpm; - Operating Pressure: 90Psi; - Power Type: Air Inlet; - Air Inlet: 1/2; - Chuck Size: 25.4 Mm - Comes With 4 Hexagon Sockets For Truck Wheels Preferably 27 - 30 - 32 - 33 Mm; - Comes With Hose Adapter; - Auxiliary Handle; - Ideal For Wheels Of Heavy Vehicles, Agricultural Machinery And Industrial Equipment; - Resistant Metal Body; - Approximate Weight 13.3 Kg., 04/07/2026 - 10:09:36, 04/07/2026 - 10:10:34, 04/07/2026 - 10:11:06, Gasoline Floor Cutter Equipment Intended For Cutting Concrete, Asphalt And Similar Floors. Minimum Technical Specifications: - Gasoline Engine, 4 Stroke; - Minimum Power: 8.2 Kw; - Diamond Disc With A Maximum Diameter Of 500 Mm (20); - Shaft Diameter (Chuck): 25.4 Mm; - Minimum Cutting Depth: 180 Mm; - Minimum Fuel Tank: 6 Liters; - Engine Cooling System: Air; - 01 Cylinder; - Reinforced Metal Structure With Wheels For Moving; - Depth Adjustment System; - Adjustable Or Ergonomic Handle; - Equipment Suitable For Professional Use In Road Works; - Minimum Fuel Tank: 6 Liters;, Professional Drill Minimum Technical Specifications: - Professional Impact Drill For Drilling In Wood, Metal And Masonry; - Bivolt Power Supply (127/220 V) Or Automatic Bivolt; - Minimum Power Of 700 W; - Switch With Variable Speed ​​Control;