Request For Quotation Purchase Of A Circulation Pump

Circulation Pump, Connecting Nuts - 2 Pcs., Gaskets - 2 Pcs., Wire, Technical Data Sheet, Packaging. The Circulation Pump With Nuts Is A Monoblock Electric Pump With A Single-Phase Three-Speed Electric Motor To Create Forced Circulation Of The Coolant. Equipped With An Overheating Protection Device, Which Guarantees A Long Service Life. Has Three Power Levels -145,170,182 Watts. The Rotor Is In Liquid, Which Ensures Its Cooling. Three Stages Of Power, Cast Iron Body - Long Service Life, Rotor Shaft, Bearings, Thrust Washers Are Made Of Ceramics With A Mirror Working Surface - The Pump Is Able To Operate On Hard Water, The Rotor Compartment Is Cooled By The Flow Of The Working Medium Entering Through Special Holes In The Pressure Plate And Returning To The Impeller Blades Through The Shaft Channel. The Circulation Pump Is Designed For Open And Closed Heating Systems With Operating Temperatures Up To 110 C, Maximum Static Pressure 10 Bar. The Nominal Diameter Of This Model Is 25 Mm, The Maximum Pressure Is 8 M Water Column, The Installation Length Is 180 Mm. Connecting Nuts And A 115 Cm Cable With A Plug Are Included In The Delivery Set. The Pump Can Be Installed In Any Position But In Such A Way That The Shaft Is Horizontal.