Road-Surfacing Machinery – «Supply – Injection Sealer». The Object Of The Contract Consists In The Supply Of 1 (One) Piece Of Injection Sealer, New, Unused, Of The Latest Generation, Mounted On A 6X4 Chassis, Fully Equipped With A Specialized Superstructure, Intended For The Maintenance And Repair Activities Of Asphalt Pavements Within The Radius Of The Municipality Of Bistrița. The Equipment Is Composed Of Two Main Components: A. 6X4 Chassis, With The Following Mandatory Minimum Technical Characteristics: Continuous Reinforcement Of The Strut From Front To Back (Minimum Thickness 13 Mm); Air Compressor Minimum 750 Cmc With 2 Cylinders; Alternator Minimum 180 A; 13/3-Speed Automatic Gearbox (Front/Rear); Cabin Suspension With 4 Air Cushions; Drivers Seat With Ventilation, Suspension And Heating; Rear Pneumatic Suspension With 8 Air Cushions; Coupler Rocklinger 40G Or Equivalent; Rear Lights And Led Indicators; Forward Collision Warning System; Adaptive Cruise Control; Automatic Particulate Filter Regeneration With Manual Control; Engine With Minimum Maximum Power Of 345 Kw, Minimum Cylinder Capacity Of 10,800 Cc, Minimum Torque Of 2,200 Nm; Exhaust Gas Brake Minimum 300 Kw. B. Specialized Superstructure, With The Following Mandatory Minimum Technical Characteristics: Container For Stones With A Minimum Capacity Of 6 M³, Divided Into 2 Chambers (40/60), With Two Auger Conveyors With Hydraulic Drive; Separate Container For Emulsion With A Minimum Capacity Of 2,000 Liters, Thermally Insulated; Emulsion Pump With Hydraulic Drive, Located Outside The Emulsion Tank, Which Allows The Emulsion To Be Pumped From The External Tank; Additional Heating Of The Emulsion Filter Layer And The Emulsion Pump; Burner With A Minimum Power Of 70 Kw, Fed From The Diesel Tank Shared With The Engine; Automatic Emulsion Container Heating Plant With Diesel Burner And Electronic Temperature Control; Air Flow Reduction System, Bypass With Pneumatic Actuation; Electronic Process Control System, Including Electronic Regulation Of The Amount Of Emulsion In The Mixture, Regardless Of The Amount Of Aggregates; Application Arm With Pneumatic Suspension And Swing System, Located At The Rear, With A Maximum Reach Of At Least 3.5–4 M; Automatic Cleaning System In 2 Steps (Compressed Air Blowing And Solvent Cleaning); Rar Approval. Detailed Technical Specifications Can Be Found In The Specifications. Note: The Number Of Days Until Which Clarifications Can Be Requested Before The Deadline For Submission Of Offers Is 20 Days. The Contracting Authority Will Respond Clearly And Completely To All Requests For Clarifications, Sent Within The Mentioned Term, On The 14Th Day Before The Deadline For Submission Of Offers. The Technical Specifications Can Be Found In The Specifications.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
