Bids Are Invited For Acquisition Of Custom Furniture For The Ambulatory Of The Municipal Health Center And The Meeting Room Of The Municipal City Hall Of Princesa/Sc.

Rectangular Meeting Table Made Of High-Resistance Mdf, Covered In Dark Brown Melamine, With A Uniform Pattern, With Scratch-Resistant Properties And Easy Maintenance. With Approximate Dimensions Of 345 Cm Long, 130 Cm Wide And 75 Cm High, The Table Presents Appropriate Proportions For Administrative Environments And Meeting Rooms. The Top Is 4 Cm Thick, With A Uniform Finish, Free From Imperfections, Featuring Rounded Edges And Corners For Greater Security And Aesthetic Sophistication. The Structure Is Made Up Of Panel-Type Wooden Legs, 4 Cm Thick, Reinforced By A Central Support That Guarantees Greater Stability And Durability To The Set. The Support Panels Should Be Positioned Slightly Inwards In Relation To The Ends Of The Table, In Order To Provide Comfort To Users Sitting At The Ends, Avoiding Direct Contact Of The Legs With The Panels., Module With Measurements Of 90X90x104cm (Lxdxh). 316 Stainless Steel Structure With Top Top, Shelf And Base In 316 Stainless Steel Blade. The Module Structure Must Support A Total Load Of 60Kg Of Distributed Equipment, That Is, Each Space (Shelves) Needs To Support Around 20Kg Of Distributed Equipment., Furniture With Measurements Of 51X60x250cm (Wxdxh). Floor Cabinet Made With High Density Mdf Structure, Entirely Covered In High Pressure Melamine Laminate (Hpl), Light Color To Be Defined, With: Two External Doors, One 195Cm High (Bottom) And Another 45Cm High (Top). Internal Dividers: Only The Divider On The Larger Left Side Must Support And Have A Free Space Of Approximately 190X50x20cm To House Two Rigid Stretchers Measuring 185X45x4, 5Cm And 10Kg Each; The Rest Can Be Divided According To The Possibility Of The Furniture And Remaining Measurements. Feet (Plinth) Made Of 316 Stainless Steel Metal With A Height Of 10Cm., Furniture Measuring 185X50x55cm (Wxdxh). Overhead Cabinet Made With High Density Mdf Structure, Covered In High Pressure Melamine Laminate (Hpl) Light Color To Be Defined With: 4 External Doors And 4 Dividers (Spaces Divided Proportionally). Structure Must Support Approximately 2 Kg Distributed In Each Door Opening, Totaling Approximately 8Kg In The Module., Furniture With Measurements Of 62X60x250cm (Wxdxh). Floor Cabinet Made With High Density Mdf Structure, Covered In High Pressure Melamine Laminate (Hpl) Light Color To Be Set With An External Door. Internal Dividers: With 5 Shelves (Spaces Divided Proportionally). 316 Stainless Steel Feet (Plinth) With A Height Of 10Cm, 04/06/2026 - 08:18:25, 04/06/2026 - 08:36:44, 04/06/2026 - 08:36:45, 04/06/2026 - 08:36:46, Furniture With Measures 185X50x85cm (Lxdxh). Bench Made With High-Density Mdf Structure, Covered In High-Pressure Melamine Laminate (Hpl), With A Waterproof, Washable And Abrasion-Resistant Finish. Top Made Of 316 Stainless Steel. Front Part Of The Bench With Two Sliding Doors, Which Give Access To An Internal Compartment, And In The Compartment There Is A Horizontal Shelf, Totaling Two Internal And Proportional Subdivisions. The Bench Structure Must Support A Minimum Load Of 10 Kg. The Base Has A 316 Stainless Steel Plinth Measuring 10 Cm High. The Unit Measures 130X40x88cm (Wxdxh). Floor Counter Made Of High-Density Mdf, Fully Covered In High-Pressure Melamine Laminate (Hpl), Resistant To Moisture, Abrasion And Chemicals