Bushing Insulator Ipu 10/630 7.5 Uhl1. Rated Voltage - 10 Kv, Rated Current - 630 A, Lightning Impulse Test Voltage - 80 Kv, Minimum Destructive Bending Force - 7.5, Creepage Length - 300 Mm, Weight - 8.5 Kg. Gost 15150-69., Set Of Mounting Parts For Rlnd (Kron-Yn (Ra-5 3 Pcs., Ra-2 1 Pc., Ra-1 1 Pc.), Clamp X7-3 Pcs., Shaft Ra-3 2 Pcs.). Gost R 52726-2007., Tip A–70–12. Aluminum Cable Lugs, Secured By Crimping, Are Intended For Terminating Wires And Cables With Aluminum Conductors With A Cross-Section Of 70 Mm2. The Tips Are Made Of Aluminum Pipe. Gost 9581-80., Automatic Connecting Clamp Cil 2. Used For Connecting Bare Conductors. Automatic Connection Clamps Are Reliable And Easy To Install Without The Use Of Additional Tools. Characteristics And Description: • Clamp Type - Connecting, Automatic Connecting Clamp, Wire Cross-Section, Mm2: 70-95, Wire Diameter, Mm: 9.3-11.7. Gost R 70352-2022., K9 Cap. Pin Diameter – 24 Mm. Weight – 20 G. Gost 18381-80, Cap K7. The Inner Diameter Of The Pin Is 22 Mm, The Outer Diameter Is 31.5 Mm, The Height Is 35.9 Mm, Bending Force (Perpendicular To The Axis) Is 3.5 Kn (350 Kgf), Bending Force (Along The Axis) Is 0.735 Kn (75 Kgf). Gost 18381-80., Wire Sip3 1*70. Cross-Sectional Diameter 17.00 Mm. Minimum Bending Radius 170Mm. The Nominal Thickness Of The Core Insulation Is 1.70 Mm. Electrical Insulation Resistance At 1 Km And 20ºс: 12 Mohm. Permissible Current Load 240A. Permissible Short Circuit Current 6.50 Ka. Gost 31946-2012, Switch Bpv 4 400A. Designed For Manual Direct Or Remote Closing, Opening Or Switching Of Electrical Circuits. Performed For Currents From 100A And Above. Separate Series, Mainly Direct Current, Are Produced For Currents Up To 10 Ka. Switches Are Also Manufactured For Low Currents: 5-10A (Moving And Fixed Contacts Of The Base Are Made Of Electrical Copper Grade M1). Gost 15150.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
