Half-Turn Tap, Copper, Dn 25 Mm, Half-Turn Tap, Copper, Dn 50 Mm, Optical Wireless Mouse Connection Type - Wireless (Radio Channel, Bluetooth), Sensor Type Optical Led. Optical Sensor Resolution - No Less Than 18000 Dpi, Sampling Frequency - No Less Than 2000 Hz, Connection Interface - Usb (Via Radio Receiver), Power Source - Built-In Li-Ion Battery, Autonomous Operation Time - No Less Than 70 Hours, Size - Length No Less Than 120.6 Mm, Width No Less Than 64 Mm, Height No Less Than 37.8 Mm. Charging Port - Usb Type-C., Water Standpipe Vk-4. Specifications: Working Pressure, Mpa 0.1-0.6 Nominal Diameter Of The Supply Pipe (Depending On The Standard Size), Mm 15; 20 Conditional Diameter Of The Supply Pipe From The Receiver To The Water Supply Network, Mm 20 Valve Stroke, Mm 16-18 Column Height, Mm A) Above-Ground Part 1000 $10 B) Underground Part (With An Interval Of 250 Mm Depending On The Standard Size) 750-3500, Ceiling Box Distributor (Mounted), Dishwashing Detergent, Gel, Aos Or Sarma, Liter, Steel Water And Gas Pipe, Diameter 50Mm. Wall Thickness 3.5Mm. The Length Of The Whip Is 6 Or 12 Meters. Gost 3262-75. Steel Grade 2Ps. Outer Diameter 57 Mm., Well Pump \Vilo Twi 04.09-21-Dm- Minimum Efficiency Index (Mel) ≥ 0.7 Mains Connection: 1~230 V, 50 Hz Or 3~400 V, 50 Hz Immersion Mode: S1 Temperature Of The Pumped Liquid: 3 - 30 °C Minimum Running Speed Of The Electric Motor: 0.1 M/So Max. Neska Content: 50 G/M3 Max. Number Of Starts: 20/Hour Max. Diving Depth: 150 M Degree Of Protection: Ip68 Discharge Connection: Kr 1% Rp 2, Ball Valve For Pressure Gauge Dn15 (1/2) Internal/Internal Carving Handle: Butterfly. With A Descender., Ball Valve Du150 Ru25. Maximum Operating Temperature: 200 Degrees. Maximum Operating Pressure: 25 Bar Case Material: Steel Minimum Operating Temperature -40 Degrees. Drive: Manual Working Environment: Petroleum Products, Aggressive Environment, Water Manual Drive Handle Lever Valve Type: Ball Connection Type: Welding Conditional Diameter: 125 Mm., Brush Hammer, With An Impact Force Of At Least 8 J, Operating Modes: Drilling, Hammer Drilling, Chiselling, Maximum Drilling Of At Least 40 Mm, Power At Least 1560W, Metal Bend 90C°, Dn 57 Mm. Outer Diameter (Dн): 57 Mm. Conditional Bore (Dn/Dn): 50 Mm. Wall Thickness: The Most Common Options Are 3.0 Mm, 3.5 Mm, 4.0 Mm And Reinforced Up To 6-7 Mm. Material: Steel 20 (Carbon), 09G2s (Frost-Resistant) Or 12Х18н10т (Stainless). Weight: For A 3.5 Mm Wall, The Weight Of One Unit Is Approximately 0.51 Kg. For A 5 Mm Wall - About 0.8 Kg. Working Pressure: Up To 16 Mpa (160 Bar)., Forged Bend Without Thread Dn50*3.2 Branch Material: Steel Outer Diameter: 57Mm Connection Type: Welding Wall Thickness: 3.2 Mm Bend Angle: 90 Degrees. Nominal Diameter: 50 Mm Type: Suture, The Jemix Ch 4-2-65 Borehole Pump Is Designed: For Lifting Water From Wells And Wells With A Diameter Of At Least 4 Inches (94 Mm)
