Pe Saddles Dn110mm, Output 25Mm. Internal Thread. Saddle In The Form Of A Crimp Clamp. Used In Water Supply Systems. Installation Of The Crimp Saddle Is Easy And Quick Using Bolts And Nuts, And The Tightness Of The Connection Is Ensured By A Rubber Sealing Ring. The Maximum Permissible Operating Pressure Of The Transported Liquid Is 16 Atmospheres, Sleeve (Adapter) For Flange Dn-225 Mm Sdr17 Polyethylene Pe100 Cast Pn10. Wall Thickness 13.4Mm,, Transition Tee Pe Sdr11 Dn315x160. Sdr 17. Diameter (Dn1) - 315 Mm. Diameter (Dn2) - 160 Mm. Diameter (Dn1) - 315 Mm. Length No Less Than 450 Mm. Material - Polyethylene Pe 100. Nominal Diameter (Dn) - 315 (300) Mm., Saddle For Pipes Pe 225X1 Internal Thread 25Mm. Saddle In The Form Of A Crimp Clamp. Used In Water Supply Systems. Installation Of The Crimp Saddle Is Easy And Quick Using Bolts And Nuts, And The Tightness Of The Connection Is Ensured By A Rubber Sealing Ring. The Maximum Permissible Operating Pressure Of The Transported Liquid Is 16 Atmospheres, Steel Flange For Pe Du-150 (Gost 33259-2015 03). Maximum Pressure Ru16. Material - Steel. Weight - Not Less Than 6.51 Kg. The Internal Diameter Of The Flange Is 178Mm. Number Of Holes - 8 Pieces., Sleeve (Adapter) For Flange Dn-160 Mm Sdr17 Polyethylene Pe100 Cast Pn10. Wall Thickness 9.5Mm,, Polyethylene Pipe Pe-100 Du-160X9.5 Sdr 17 (10 Atm.). Gost: 18599-2001. Polyethylene Pipe (Pe-100) Sdr 17 Is Intended For The Construction Of Pipelines With A Pressure Of Up To 10 Atmospheres, Transporting Drinking Water, As Well As Technical Liquid. Used As Protective Sleeves. It Is Connected By Butt Welding, As Well As Using Electrofusion Couplings. Outer Diameter: 1600Mm. Section Length: 12 M, Sdr: 17, Working Pressure: 10 Atm., Wall Thickness (Mm): 9.5., Polyethylene Pipe Pe-100 Du-200X11.9 Sdr 17 (10 Atm.). Gost: 18599-2001. Polyethylene Pipe (Pe-100) Sdr 17 Is Intended For The Construction Of Pipelines With A Pressure Of Up To 10 Atmospheres, Transporting Drinking Water, As Well As Technical Liquid. Used As Protective Sleeves. It Is Connected By Butt Welding, As Well As Using Electrofusion Couplings. Outer Diameter: 200Mm. Section Length: 12 M, Sdr: 17, Working Pressure: 10 Atm., Wall Thickness (Mm): 11.9., Polyethylene Bushing (Adapter) Dn-100 Mm Sdr17 Cast Pe100 For Flange - Extended Dn100 Pn10. Characteristics: Sdr 17. Wall Thickness - 9.5 Mm. Material - Polyethylene Pe100. Nominal Pressure (Gas) - 8 Atm. Nominal Pressure (Water) - 10 Atm. Nominal Diameter (Dn) - 100 Mm Length (L): Not Less Than 190 Mm., Ball Valve Brass Nickel Dn 25 (1) Hp-Bp Butterfly Tim (9/36). Valve Type Ball. Nominal Diameter 25 Mm. Working Medium Air, Non-Aggressive Medium, Water. Minimum Operating Temperature -20 Degrees. Maximum Operating Temperature Not Less Than 150 Degrees. Maximum Operating Pressure Not Less Than 40 Bar. Body Material Brass. Coating Nickel. Method Installation - Horizontal/Vertical. Drive Manual. Manual Drive - Butterfly Handle 1. Connection Type: Internal-External., Steel Gate Valve 30S41nzh (Ru-16) Dn-150 Mm. Gost 9698-86. Dn (Dn) Dn150. Ru (Pn) Ru16. Connection Type - Flange. Symbol (According To Tskba) - 30C41nzh. Drive - Manual. The Design Of The Locking Body Is Wedge. Construction Length L - Not Less Than 280 Mm. Height H - Not Less Than 576 Mm. Weight Not Less Than 67 Kg. Case Material - Cf8 Steel. Ambient Temperature - Up To + 425°C. Tightness Class According To Gost 9544-2015 - Class A., Steel Gate Valve 30S41nzh (Ru-16) Dn-100 Mm. Gost 9698-86. Dn (Dn) Dn100. Ru (Pn) Ru16. Connection Type - Flange. Symbol (According To Tskba) - 30C41nzh. Drive - Manual. The Design Of The Locking Body Is Wedge. Construction Length L - Not Less Than 230 Mm. Weight Not Less Than 39.9 Kg. Case Material - Cf8 Steel. Ambient Temperature - Up To + 425°C. Tightness Class According To Gost 9544-2015 - Class A., Hex Nut M22 Gost 5915-70, 5927-70, Accuracy Class A., Strength Class 6.0. Galvanized, M22 Flat Washer Din 125 (Gost 11371-78) Galvanized. Washer Material - Steel. Type Of Washer: Flat. Washer Thickness 3. Coating Zinc. Outer Diameter 39. Inner Diameter 23., Steel Tee Dn 159 (Dn 150). Gost 17376. Wall Thickness (S): Not Less Than 6.0 Mm
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
