Tenders Are Invited For Reconstruction Of District Road No. 3338D Krajanów - Sokolica Over A Length Of 0.565 Km

1. Name Of The Task Given By The Ordering Party: Reconstruction Of The District Road No. 3338D Krajanów - Sokolica Over A Length Of 0.565 Km2. The Subject Of This Public Procurement Is: Construction Works1.3. The Scope Of The Order Includes: 1) Cutting And Supplementing The Roadsides With Crushed Aggregate Or Milled Aggregate, Both Sides Of The Roadsides - Average Thickness 15 Cm, 50 Cm Wide, Along With Filling, Planting And Appropriate Compaction 2) Cold Milling Of Asphalt Surfaces - Road, Average Thickness 5 Cm With Removal Of Excavated Material Up To A Distance Of 1 Km Along With A Fee For Storage Or Disposal Of The Surplus Spoil. With The Average Road Width Of The Section 5.0 M, Over A Length Of 575 M; 3) Excavation And Construction Of A Deep Bed. 20 Cm For The Designed Exits4) Construction Of A Foundation Of Crushed Aggregate, Upper Layer 20 Cm Thick On The Exits5) Construction Of The Through Part Of The Culvert Under The Exits From Reinforced Concrete Or Pvc Pipes Ø 50 Cm Along With Dismantling The Existing Culvert And Performing Earthworks 6) Construction Of End Walls Of Crushed Stone On Cement Or Concrete Mortar 7) Mechanical Cleaning And Sprinkling Of The Layers Constructions With Asphalt Emulsion (Roadway + Exits)8) Asphalt Concrete Surface - Binding Layer - Ac 16 W Asphalt Concrete, 6 Cm Thick - Roadway + Exits9) Asphalt Concrete Surface - Wearing Course, Ac 11 S Asphalt Concrete, 4 Cm Thick - As Above10) Cleaning The Ditch From Silt With A Silt Thickness Of Up To 20 Cm. 11) Clearing Bushes And Undergrowth With Removal Of The Remains4. The Detailed Description Of The Subject Of The Order Is Specified In: 1) Auxiliary Cost Estimate - Appendices No. 11 To Swz2) Drawing Documentation (Pzt) - Appendix No. 12 To Swz5. Detailed Technical Conditions For The Execution Of Works Are Specified In: Detailed Technical Specification (Sst) - Annex No. 13 To Swz.6. Whenever References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Are Used In The Design Documentation, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If Trademarks Are Used In The Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, It Means That They Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Use Equivalent Materials Or Devices, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will In No Way Adversely Affect