Tenders Are Invited For Modernization Of Primary School No. 313 And Kindergarten No. 55 At Ul. Cybisa 1 In Warsaw.

The Subject Of The Order Is The Modernization Of Primary School No. 313 And Kindergarten No. 55 At Ul. Cybisa 1 In Warsaw. The Modernization Project Includes Bathrooms And A Canteen With A Food Serving Area. The Bathrooms Included In The Order Are Located Throughout The Teaching Complex. On The Ground Floor, Two Sanitary Facilities Need To Be Modernized, Each Of Which Includes A Boys Bathroom And An Adjacent Girls Bathroom. Staff Bathrooms Should Also Be Renovated On The Same Level. On The First Floor, A Bathroom For Boys, Girls And Staff Is Planned For Modernization, Constituting Adjacent Rooms. In The Kindergarten Part Of The Building, Modernization Works Should Be Taken Into Account: The Staff Bathroom At The Basement Level, The Kindergarten Staff Bathroom And The Kitchen Facilities. In The Central Part, Connecting The School With The Kindergarten, There Is A Feeding Block. The Canteen And Meal Serving Area Should Be Modernized There. Scope Of Work To Be Performed: Preparatory And Demolition Works - Protection Of Adjacent Rooms Against Damage And Dirt, - Dismantling Of Existing Sanitary Equipment (Toilet Bowls, Washbasins, Urinals), - Dismantling Of Taps And Sanitary Equipment, - Dismantling Of The Serving Counter With Accessories, - Removal Of Existing Ceramic Linings Of Walls And Floors, - Dismantling Of Toilet Cabin Walls, - Dismantling Used Elements Of Water And Sewage Installations To The Extent Intended For Replacement, - Disassembly And Reassembly (Recovery) Of Radiators, - Removal And Disposal Of Rubble And Demolition Materials In Accordance With Applicable Regulations. Demolition Works Should Be Carried Out Manually, With Particular Caution So As Not To Damage The Structural Elements Of The Building And Elements That Are Not The Subject Of The Modernization. Construction And Finishing Works Walls: - Repairs And Additions To Cement And Lime Plasters, - Priming Of Substrates With Preparations That Strengthen And Reduce Absorbency, - Implementation Of Moisture-Proof Insulation (Liquid Foil) In Wet Areas, - Implementation Of Wall Claddings With Glazed Ceramic Tiles To A Height Of Min. 2.0 M, - Grouting With Flexible Mortars, Resistant To Moisture And Cleaning Agents, - Remaining Wall Surfaces Painted With Latex Paints With Increased Resistance To Abrasion And Moisture. Floors: - Preparation Of The Substrate By Leveling And Making Self-Leveling Screeds, - Making Under-Floor Moisture-Proof Insulation, - Laying Anti-Slip Stoneware Tiles, - Making Plinths From Stoneware Tiles, - Grouting With Flexible Mortars. Ceilings: - Preparation Of The Base For The Installation Of A Suspended Ceiling Structure, - Installation Of Exhaust Ventilation, - Construction Of A Suspended Ceiling Structure With Filling. Door Joinery, Sanitary Walls: - Disassembly Of Existing Door Joinery, - Installation Of New Internal Doors Resistant To Moisture, With Air Vents Or Ventilation Undercuts, - Adjustable System Door Frames, Installed In Accordance With The Manufacture