Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Adjustment Of The Natural Soil). Af_08/2020, Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af_01/2024, 02/04/2026 - 19:21:45, Manufacture, Assembly And Disassembly Of Shoe Formwork, Made From Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_01/2024, Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Concreting Footing, Fck 20 Mpa, Using Jerica - Laying, Densifying And Finishing, Manual Backfilling Of Trenches, With Percussion Soil Compactor. Af_08/2023, Manual Excavation For Baldrame Beam Or Running Footing (Including Excavation For Placing Formwork). Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, Baldrame Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Concreting Of Crowning Block Or Baldrame Beam, Plating Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, Surface Waterproofing With Cement Mortar And Sand, With Waterproofing Additive, E = 1.5Cm. Af_09/2023, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 8 Uses. Af_09/2020, Assembly And Disassembly Of Beam Formwork, Without Propping, Made Of Resin Wood Sheet, 8 Uses, Propping With Wooden Fork, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 8 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 10 Steel, Unidirectional Precast Slab, Double-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height Lt = 12 Cm (Filling+Cover) = (8+4). Af_08/2025, Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Launching, Sealing Masonry Of Horizontally Drilled Ceramic Blocks Of 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Pre-Molded Lintel With Up To 1.5 M Span, Thickness Of *10* Cm. Af_03/2024, Pre-Molded Reverse, Opening Aluminum Door With Paneling, With Trim, Fastening With Screws - Supply And Installation. Af_12/2019, Sliding Aluminum Window With 2 Panes For Glazing (Glass Included), Frame/Frame 6 To 14 Cm, Acetate Or Glossy Finish, Screw Fixation, Without Trim/Alizar, Dimensions 100X120 Cm, Silicone Sealing, Exclusive Contramarco - Supply And Installation. Af_11/2024, Sliding Aluminum Window With 3 Fols
