Bids Are Invited For Acquisition And Installation Of 01 Plank/Chassis Type Body, Robust And Reinforced, Intended For The Transportation Of Large And Medium Size Machines, To Be Installed On A Truck Belonging To The Agriculture Department Of The Municipality Of Otacílio Costa, Including All Materials, Accessories, Labor And Other Services Necessary For Delivery And Full Operation, In Accordance With The Quantities And Requirements Established In This Instrument, According To The Table Attached To This Terms Of Reference

Chassis Board / Crossbeams Chassis Made From Laminated I-Beam 2Nd Core 6” Inches High. Sleepers Placed Every 400Mm On Laminated I-Beam 2Nd Core 3” High. 8 Inch Side Finishing Profile Made Of 6.00Mm Thick Astm A36 Steel Sheets. Flooring On The Flat Side Covered In 50Mm Thick Eucalyptus Wood, 900Mm Thick On Each Side, With A Checkered Plate With A Recess System In The Center. Sloping Rear Recessrecessed On The Part Rear With Ramps To Raise Machines (1200Mm), Manufactured In 3” Inch Dealtura Laminated I Beam Covered In Astma36 Checkered Type Steel Sheet With 2”Inch X 6.35Mm Thickness. Astm A36 With Type U Profile Of 4.00Mm Thickness Of Round Corners.Hydraulic Unithydraulic Unit With Control (02Sections) Of 12 Or 24 Volts Double Electric Action, Hydraulic Electric Pump, 8 Liter Reservoir, 02 Electric Double Action Valves, 01 Hydraulic Controls Of02 (Two) Slices With Lever For Ramp Movement (Lower Or Retract). Hydraulic Cylinders Fixed 01 On Each Ramp Interconnected To The Hydraulic Control And Hydraulic Hoses. Fastening Eyes On Steel Plates 5/8 Bushings And Thru Axle.Support Shoe(02) Paddle/Support Shoe (Hydraulic)At The Rear For Loading Machines.Accessories04 (Four) Simple Side Lashing Handles; 02 (Two) Ratchets (15 Ton) To Tie Down The Machines That Will Be Transported. Rear Warning Plate And Stickers According To Abnt; Water Cord, Spare Support, Tool Box. Rear Bumper And Side Protectors Approved By Inmetro. For Steel Fenders With Rubber Extension. Side And Rear Reflective Strips. Signalseach Side According To Resolution 859/21Contran.Finishing / Paintingsurface Preparation L