Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of Permanent Equipment And Materials Contained In The National List Of Equipment And Permanent Materials Financeable For The Sus (Renem), To Meet The Demands Of The Municipal Health Department Of The Municipality Of Paraguaçu-Mg/Executive Branch.

Adip?Meter - Metal Spring Type, Analog/Clinical Technology, Aluminum Body With Black Ep?Xi Paint Coating, Cable And Protectors In Nylon Technyl, Fixed Tips In Nylon Technyl And Zinc Plated Steel Springs, Ruler With Markings In Mil?Meters, Opening Of 75 Mm And Springs With Pressure Of +-10 G/Mm?, Packaging Transport Case With Case, Anthropometric Tape And Label For Access To Software (Body Composition Analysis), Minimum Specifications: Sensitivity 1 Mm, Reading Amplitude 75 Mm, Spring Pressure +-10 G/Mm?, Approximate Dimensions 286 Mm X 185 Mm, Base Made Of Aluminum With Black Epoxy Paint Coating. Manufacturer/Supplier Warranty 12 Months., Dental X-Ray Device? Installation: Column With Conventional Arm; Operation Mode: Digital; Voltage: Minimum 7Ma. For Dental Use, Seated On Four Double Castors, With Brakes. Articulated Arms Made Of Profiled Aluminum, With A Horizontal Reach Of 1104 Mm And A Vertical Reach Of Up To 1104 Mm. 620Mm; Mechanically Balanced Through Springs That Compensate For The Weight Of The Device. Head With Grounding System, Two Limiters On The Joint As Protection To Electrical Cables. Insulation By Oil Immersion. Rubber Expander Chamber With Resistance Potential Elasticity And Size. Total Filtration With 2.71Mm Aluminum Equivalency To Release Useful Rays And Retain Soft Rays, Eliminate Secondary Radiation. Primary Collimator, Placed After The Aluminum Filter To Limit The X-Ray Beam To The 59 Mm Diameter At The Locator Cylinder Exit, Reducing Radiations In Other Directions Preventing The X-Ray Beam From Reaching The Cylinder Walls. Long Orientation Cylinder, Used To Allow Perfect Positioning Of The Film In Relation To The X-Ray Beam; Sized For A 200Mm Focus-Film System; Coated In 0.5Mm Thick Lead Sheet To Retain Secondary Radiation. Secondary Collimator Located At The End Of The Cylinder To Eliminate Secondary Radiation That May Form After The Primary Collimator. 0.8 X 0.8Mm Focal Point For Greater Sharpness And Detail. Goni?Meter For Desired Incline Angle, Graduated With Divisions Of 10 By 10 Degrees, Both, Split Air Conditioning. Capacity/Cycle: 12,000 Btus, Hot And Cold. High Wall Split Model Air Conditioner, Hot/Cold Cycle Type, White Color, Minimum D Temperature, Antibacterial Air Filter, High Air Flow Speed Of Minimum 500 M?/H, Remote Control, Digital Thermostat, Sleep And Swing Functions, Voltage 220V Or 127V To Be Defined At The Time Of Order, Type Of Gas R410a, 12,000 Btus. Manufacturer/Supplier Warranty 12 Months., Cabinet Rio Showcase - Cabinet Made Of Steel/Iron With Structure Built In Structural Profiles In Non-Carbon Steel Sheet 22 (1.50Mm) With Plate Closure No. 22 (. Minimum And Approximate, Being Cabinet 0.65Mm X 0.40Mm X 1.65M (W Xp Manufacturer/Supplier Warranty 12 Months., Cabinet 2 Doors In Steel - Cabinet In Steel 2 Doors With 4 Trays, 1 Being Fixed And 3 Adjustable With Key And Handle, In Minimum Or Approximate Measurements Of 2007Mm X 1180Mm X 400Mm (H) (P), Shelf Plate Minimum 26 (0.45Mm), Shelf Plate