Construction Work – Fajsz_Development Of Social And Nursing Services. Total Useful Floor Area: 191.31 M2 The Main Quantities Of The Public Procurement: The Bedding Works Required For Construction Are Carried Out With An Earthmoving Machine Or By Hand. During The Foundation, A Reinforced Base Plate Will Be Created, With Butting Head Beams On Micropile Foundations, Taking Into Account What Is Written In The Supporting Structure Work Sections Of The Design Document. The Main Aspects Of Building Insulation, As Defined In The Construction Work Section, Are Insulation Against Soil Moisture, Step-Proof Insulation Built Into The Floor Structure, External Thermal Insulation On Facade Walls, Insulation Of Reinforced Concrete Structures And Shutters According To The Plan. Above The Attic Plasterboard Demarcation, The Required Cm Vtg. - Mineral Wool Thermal Insulation Must Be Used. Load-Bearing And Partition Wall Structures Are Made Of Ceramic Masonry Elements Covered With Knots According To The Static Design Chapter, With A Reinforced Concrete Crown On Top. Following The Technical Documents, The Horizontal Load-Bearing Structures Are Reinforced Concrete Structures, The Doors And Windows Are Prefabricated Reinforced Concrete Structures With Ceramic Jackets, The Details Of Which Are Regulated In The Static Design Chapter. The Floor Above The Ground Floor Is Provided By The Lower Grid Tube Of The Wooden Roof Structure With Nail Plates - The Manufacturer Prepares The Design Plan For This. The Roof Structure Of The Building Is A Wooden Lattice Support With Nail Plates, With A Hipped Gable Roof, With A 35° Inclination Angle - According To The Construction Plan Prepared By The Manufacturer, Underlayment On Cornice, With Counter Laths And Tile Tiling. Wood Materials Are Protected Against Fungal And Insect Damage And Flame Spread, The Wood Material Protection Must Be Proven. The Lime-Cement Plaster Repaired In The Interior Is Made From Bagged Material On The Side Wall. The Facade Walls Will Be Plastered In The Colors Specified On The Facade Plans. The Building Must Be Covered With Tiles (E.G. Creaton Rona) With The Necessary System Elements. Ventilation Under The Cladding Must Be Ensured With Ventilation Elements Installed On The Eaves And With Adequate Ventilation. Snow Hooks Must Be Placed Along The Eaves. During Construction, Its Regulations Must Be Fully Complied With. 1 Rtg Mounted On A Galvanized Steel Frame On The Lower Grid Tube Of The Wooden Roof Structure. Plasterboard Covering Is Made According To System Regulations, Min. With A Fire Resistance Value Of 30 Minutes. See The Fire Protection Description! The Covered Area In Front Of The Entrance Will Be Covered With Fire-Resistant Impregnated Plasterboard. In The Rooms With Exhaust Ventilation, A Plasterboard False Ceiling With A Plasterboard Covering Is Also Made On A Lower Level To Cover The Mechanical Wiring. The Facade Windows Are Min. 5-Chamber Plastic Structures, With 3-Layer Heat-Insulating Glazing, Plastic Elbow. A Heat-Insulating Floor Connector Must Be Placed At The Doors. Belt-Driven Aluminum Shutters In The Basic Color Must Be Installed For The Doors And Windows According To The Consignment. The Internal Doors Are Steel Casing Structures With A Thresholdless Design. The Toilets Are Equipped With A Partition Wall. Tile Flooring In The Building, Glued, Dilated According To Regulations In The Pram Storage Room. In The Nurses Room,
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
