Fixed Digital X-Ray Device Factory Digital Radiological Set With X-Ray Parameter Commands Integrated To The Software, Detector And Equipment With Unique Registration With Anvisa. High Frequency X-Ray Command And Generator - Multipulse; Potência Nominal Mínima: 60Kw; Microprocessed Control System; Digital Control Panel Integrated With On-Monitor Imaging Software; Kv Adjustment Range From: 40 To 150Kv - With 1 Kv Steps; Ma Range Of 20, 50, 100, 200, 400, 500, 630 Ma At Minimum; Automatic Fine/Coarse Focus Selection; Minimum Exposure Time: 0.001 To 5 Seconds (Or Greater); Faixa De Mas De 0, 1 A 630 Mas; Indication Of Parameters/Functions On The Digital Display Of At Least Kv, Ma And Mas; Electrical Supply – Three-Phase 220V/380V (Both) – 60Hz Fixed Table With Floating Top; Radiotransparent Homogeneous Top With Load Capacity Greater Than 300 Kg; Size 80 X 200 Cm; Longitudinal Displacement Of The Top Of +/- 55 Cm And Transverse Of +/- 12.5 Cm; Electromagnetic Brakes For Transverse And Longitudinal Movements; Centering Indication System. Anti-Diffusion Grid, Removable To Serve Pediatric Patients, Minimum Ratio 103 Lines/In. And Removable For Pediatric Patients (In90 From Anvisa); Focal Distance 100 To 150 Cm; Electromagnetic Brakes; Tray Enabling Self-Centering Of Chassis From 13X18 Cm To 35X43 Cm; Tube Holder Stand, Floor-To-Ground Type: Minimum Horizontal (Longitudinal) Displacement Of 280 Cm On Rails; Column Rotation - 180°/+180° - Activated By Pedal; Tube Holding Arm: Vertical Displacement Of 160 Cm; Rotation Of The Collimator Assembly 90°, 180° And 270°; Electromagnetic Brakes Activated By Button On The Panel Next To The Pipe; Tube Angulation Indication Type By Gravity From (+180° To -180°); Steel Structure; Electrostatic Paint Finish. Bucky Mural Minimum Vertical Standard Offset Of 150 Cm; Electromagnetic Brake For Vertical Positioning; Anti-Diffusion Grid Minimum Ratio 103 Lines / Inch And Removable For Pediatric Patients (In90 Da
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
