Bids Are Invited For Acquisition Of Water Meters, Water And Sewage Pumps For The Basic Sanitation Department. According To Annex I. Installment Delivery

Unijet Hydrometer 3/4 - Home Tachymetric Hydrometer For Cold Water Unijet Type With Magnetic Transmission Maximum Flow 3 M³/H And Nominal 1.5 M³/H Diameter 3/4 Adjustable Dial With 360 Rotation With Rotation Limiter Watchmaking Inclined At 45 Protected By Anti-Fraud Ring All Around For Protection Against Side Perforation Hinged Lid That Covers The Entire Dial And When Opened Allows Full View Regulation Device That Allows Adjustment Of The Hydrometer Under Load The Metal Regulator Cap To Prevent Breakage And Rupture Of The Seal The Housing Should Be Painted In Del Rey Blue And Above The Hydrometer Numbering It Should Have The Acronym Dae Pv On Both Sides, Submerged Motor-Pump Set 8 Hp, Voltage 220 And 380V Three-Phase, For Wells Of 06? ? 8 Stages - With The Following Minimum Specifications: Minimum Flow Of 12M³/H And Maximum Flow Of 24M³/H M.C.A. Minimum 47 E M.C.A. Maximum 111 Settlement 2 ¹/²? Radial Flow Closed Rotor Check Valve Incorporated In The Pumper, Ball Type Outlet Nozzle With Bsp Thread, 1 1/2? Electric Motor 2 Poles, 60 Hz, Rewindable And Water Cooled Suction Body, Check Valve, Stage Body And Upper Bearing In Cast Iron Impellers, Shaft And Pumper Sieve In Stainless Steel Pumper Fasteners (Screws And Nuts) In Stainless Steel Wear Bushings In Stainless Steel With Nitrile Rubber Motor With Stator Body In Steel Stainless Steel And Cast Iron Covers, Submersible Motor-Pump Set 11.5 Hp, For Wells From 06? ? 12 Stages - With The Following Minimum Specifications: Minimum Flow Of 12M³/H And Maximum Flow Of 24M³/H M.C.A. Minimum 73 E M.C.A. Maximum 168 Settlement 2 ¹/²? Radial Flow Closed Rotor Check Valve Incorporated In The Pumper, 04/01/2026 - 11:31:43, Submerged Motor-Pump Set 13, For 06? ? 14 Stages - With The Following Minimum Specifications: Minimum Flow Of 12M³/H And Maximum Flow Of 24M³/H M.C.A. Minimum 86 E M.C.A. Maximum 197 Settlement 2 ¹/²? Radial Flow Closed Rotor Check Valve Incorporated In The Pumper, 40 Hp Submersible Motor-Pump Set, For Wells From 06? ? 15 Stages - With The Following Minimum Specifications: Minimum Flow Of 25M³/H And Maximum Flow Of 60M³/H M.C.A. Minimum 108 E M.C.A. Maximum 216 Repression 3? Rotor Cast By Microfusion Process In 304 Stainless Steel Has Outlet Nozzle With Bsp Thread In Diameter Of 3? Rewindable Submerged Electric Motor, Three-Phase, 2 Poles, With Degree Of Protection Ip-68, Lubricated With Non-Toxic Water-Based Emulsion Motor Coupling Using Key System Maximum Operating Temperature Of 30 °C For The Motor Maximum Number Of Starts/Hour: 10 Minimum Flow Speed For Motor Cooling 0.2 M/S, 20 Hp Submersible Motor-Pump Set, For 08? Wells ? 02 Stages - With The Following Minimum Specifications: Minimum Flow Of 50M³/H And Maximum Flow Of 105M³/H M.C.A. Minimum 28 E M.C.A. Maximum 60 Repression 5? Rotor Cast By Microfusion Process In 304 Stainless Steel Has A 5? With Bsp Thread Rewindable Submerged Electric Motor, Submerged Motor-Pump Set 60 Hp, For Wells From 08? ? 06 Stages - With The Following Minimum Specifications: Minimum Flow Of 50M³/H And Maximum Flow Of 105M³/H M.C.A. Minimum 114 E M.C.A. Maximum 196 Repression 5? Rotor Cast By Microfusion Process In 304 Stainless Steel Has A 5? With Bsp Thread Rewindable Submerged Electric Motor, Lubricated With Non-Toxic Water-Based Emulsion A

Refer document

FileName	File Description
Global Tender Document	125dd325-5777-466e-893c-2705479ff4dc.html