Bids Are Invited For Acquisition Of Outdoor Gym, Playgrounds And Permanent Equipment For The Municipality Of Guimarânia/Mg.

Galvanizb9:N18ado Triple Ski - Made With Carbon Steel Tubes Of At Least 2 ½ X 2 Mm; 1 ½ X 3 Mm; 1/X 1.50Mm; 1 2.00Mm. Drawn Carbon Steel Tube 2X5, 50 Mm Schedule 80 (60, 30X46, 22). Metal Of At Least 30 Mm X 50 Mm Flat Bar Of At Least 3/16 X 1X. Use Solid Pins, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Civil Thermo-Endure Polyester Resin Protective Film With Electrostatic Powder Deposition System, Flexible Rubber Round Stops (53Mm Built-In Internal Plug In Injected Plastic Of At Least 2 With Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Chest Chest With Puller. Galvanized Upper Joint - Manufactured With Carbon Steel Tubes Of At Least 3.X 3.75 Mm; 2 2Mm; 2 X 3 Mm; 2 5.5 Mm)1.Y 2 Mm; 1.X X 1.50Mm; 1St X 1.50 Mm. Equipment Articulation Manufactured With A Tube With A Diameter Of At Least 114 Mm And A Minimum Thickness Of 7 Mm. Laser-Cut Carbon Steel Plates With Minimum Thickness Of 2 Mm;, 3/16; . Solid Drawn Iron Rods Of At Least 1.X With Zinc-Plated Fixing Screws And At Least 1.X Zinc-Plated Washer. Double Bearings, Phosphate-Based Surface Treatment Are Used; Colored Thermo-Endure Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Zinc Plated Screws, Washers And Fastening Nuts; 3.X Internal Plastic Built-In Plug With Spherical Finish Following The External Dimension Of The Tube, Injected And/Or Rubberized Plastic Finishes, Cold Galvanized Fastening Screws With Protection Cover. Destructive High Fixation Reflective Sticker With Identification Of Muscle Groups, Triple Galvanized Walking Simulator - Made With 2 Carbon Steel Tubes Of Minimum 2 X 2 Mm; 2 X 2 Mm; 1 ½ X 1.50 Mm. Carbon Steel Plates Of Minimum 4.75 For The Equipment Fixing Point And 1.6 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.68 Mm). Use Solid Pins, Phosphate Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Dust Deposition System, Minimum 3/8 High Adhesion 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data, Triple Galvanized Riding Simulator - Made With 2 Carbon Steel Tubes At Minimum 2 X 2 Mm; 2 X 2 Mm; 1 ½ X 3 Mm; 1 ¼ X 1.50 Mm; 1 X 1.50 Mm; Flat Bar At Least 2 ½ X ¼; 3/16 X 1 . Drawn Carbon Steel Tube 2X5, 50 Mmschedule 80 (60, 30 Mm X 46, 22 Mm). Carbon Steel Sheets Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Stamped Bench With Rounded Edges. Solid Pins Are Used, Phosphate-Based Surface Treatment; Colored Thermo-Hardening Depolyester Resin Protective Film With Electrostatic Powder Deposition System, Round Blur Stops