Tenders Are Invited For Construction Of An Olioc Warehouse In Straszydel, Lubenia Commune

1. Subject Of The Order: Construction Of An Olioc Warehouse In Straszydle, Lubenia Commune. The Subject Of The Order Is The Design And Construction Of A Warehouse Hall In The Design Build Formula In Straszydle, Lubenia Commune, Located On Plots No. 1674/1. The Scope Included The Construction Of A Tent Storage Hall With Dimensions Of 10X15 M For Defense Purposes. Scope Of The Task 1) Preparation Of Design Documentation And Obtaining, On Its Basis, All Arrangements, Decisions And Other Documents Enabling The Notification Of Works To Obtain A Building Permit By The Contractor Of Construction Works, 2) Execution Of Construction Works Based On The Developed Design Documentation Together With The Preparation Of As-Built Documentation, Ending With The Final Acceptance Of The Investment Subject. 3) The Scope Of The Subject Of The Contract Also Includes The Authors Supervision Over The Implementation Of Construction Works Resulting From The Developed Design Documentation. Expected Scope Of Works For The Construction Of The Hall: - Execution Of Screed In Form Of A Concrete Slab, - Construction Of A Casing From A Sandwich Panel, - Construction Of A Steel Structure, - Covering The Roof With A Sandwich Panel, - Installation Of Entrance Gates And Doors, - Execution Of Electrical Installation, - Construction Of A Hardened Maneuvering Area Enabling The Entry And Exit Of Equipment. 2. Parameters Of The Hall Under Construction: The Building Is Located On A Currently Paved Square In The Central Part Of The Plot Covered By The Investment. The Warehouse In The Form Of A Hall With An Area Of ​​Approx. 150 M² (Dimensions 10 M X 15 M, Height 4.5 M) Will Be Made Of A Steel Structure, Year-Round, Adapted To Snow And Wind Loads, Walls And Roof Made Of Sandwich Panels Ensuring Adequate Thermal Insulation. The Hall Will Be Equipped With Industrial Gates And Technical Doors Enabling Free Entry Of Heavy Equipment, Electrical Installation, Lighting And Heating System, And The Area Around The Facility Will Be Prepared For A Paved Maneuvering Area.3. The Designed Building Will Be A Single-Story Building With The Following Parameters: Width 10 M Length 15 M Height Of The Wall To The Eaves - 4.5 M Roof Slope Angle - 22 ° Building Area - 150 M2 Temperature Resistance - 30 C To +70 C Fixing The Hall To The Ground - Chemical Anchor Or Steel Rod Roof Covering - Pir Sandwich Panel 120Mm Sheathing Of Side Walls - Pir Sandwich Panel 100Mmindustrial Electric Gate In The Side Wall With Dimensions - 4M Wide X 4M High - 2 Pcs. Technical Doors 90Cm Wide - 2 Pcs. Sheathing Of Gable Walls To The Eaves - Pir Sandwich Panel 100Mm Sheathing Of Gable Walls From Eaves To Gable - Pir Sandwich Panel 100Mm Galvanized Steel Structure - S355 Structural Steel All-Year-Round Construction Gutter - Plastic 125Mm Substrate Preparation - Concrete Slab Under The Building And Paving Stones 1 M Wide Along The Outline Installations: Electrical Including Connections, Electrical Switchboard, Lighting, Sockets, Wires,