Adult Student Set (Reference Cja06 - Fnde) - Table - Top In Particleboard Wood (Mdp), With A Thickness Of 18 Mm, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8 Mm Thick, Textured Finish, In Gray Color, Rounded Corners (As Per Project). Coating On The Lower Face In 0.6 Mm Balancing Plate (Phenolic Counter Plate). Application Of Claw Nuts With M6 Metric Thread And 10 Mm Length (See Details In The Project). Finished Dimensions 450 Mm (Width) Tops Headed With Pvc Maple Tape (Polyvinyl Chloride) With Primer, In Blue Color, Glued With Hotmelting Adhesive. Nominal Dimensions Of 22 Mm (Width) X 3 Mm (Thickness), With A Tolerance Of + Or - 0.5 Mm For Thickness. Structure Composed Of: - Vertical Uprights And Longitudinal Crossbeam Made Of Cold Rolled Carbon Steel Tube, With Seam, Oblong Section Of 29 Mm X 58 Mm, In Plate 16 (1.5 Mm); - Upper Beam Made Of Cold-Rolled Carbon Steel Tube, Curved In The Shape Of A C, With A Circular Section Of Ø = 31.75 Mm (1 1/4), 5 Mm); - Feet Made Of Cold Rolled Carbon Steel Tube, Circular Section Of Ø = 38 Mm (1 1/2), 5 Mm). Book Holder In Pure Polypropylene (Without Any Type Of Filler) Preferably Composed Of 50% Recycled Or Recovered Raw Material, Up To 100%, Injected In Gray Color. The Functional, Dimensional, Resistance And Color Uniformity Characteristics Must Be Preserved In The Product Produced With Recycled Raw Material, Allowing For Tolerances In Tone (Gray Color), At The Discretion Of The Auction Technical Team. Dimensions, Design And Finish As Per Project. The International Recycling Symbol Must Be Engraved On The Book Holder Mold, Showing The Number I, Student Set (Reference: Cja 05 Adult - Fnde) - Student Height: From 1.46M To 1.76M Table - Top In Particleboard Wood (Mdp), 6 Mm. Application Of Claw Nuts With M6 Metric Thread And 10 Mm Length (See Details In The Project). Finished Dimensions 600 Mm (Width) X 450 Mm (Length) - Feet Made From Cold Rolled Carbon Steel Tube, 5 Mm). - Book Holder In Polypropylene Copolymer Free Of Mineral Fillers, Preferably Composed Of 50% Recycled Or Recovered Raw Material, Injected In Gray Color (See References). The Functional Characteristics Are At The Discretion Of The Fnde Technical Committee. Dimensions, Design And Finish As Per Project. The Book Holder Mold Must Be Engraved, Trapezoid Set In High Impact Plastic Resin. Composed Of 06 Tables, 06 Chairs And 1 Central Table - Childrens Size. Trapezoid-Shaped Table, For Collective And Non-Individual Use, Enabling The Formation Of Study Groups With 6 Tables; 06 Chairs And A Central Table. Table In Trapezoid Shape, Formed By A Table And A Chair, Table Top Made Of Abs Thermoplastic Resin Measuring 660Mm Table Top Structure Formed By 03 Rectangular Industrial Steel Tubes Measuring 30Mm X 20Mm And An Oblong Tube Measuring 30Mm X 16Mm. An Oblong Tube Bar Measuring 30Mm X 16Mm Fixed On The Front Between A
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
