Tenders Are Invited For Road-Repair Works – Rdw In Parczew: Renovation Of Provincial Road No. 828 Garbów – Krasienin – Niemce – Jawidz, In The Town Of Jawidz

Road-Repair Works – Rdw In Parczew: Renovation Of Provincial Road No. 828 Garbów – Krasienin – Niemce – Jawidz, In The Town Of Jawidz. The Subject Of The Order Is: Renovation Of The Provincial Road No. 828 Garbów - Krasienin - Niemce - Jawidz, In The Town Of Jawidz, From Km 25+700 To Km 27+853, Length 2.153 Km. The Scope Of Works Includes, Among Others: A) Performance Of Measurement Works For Linear Earthworks; B) Corrective Milling Of The Bituminous Surface; C) Mechanical Roadside Shearing; D) Dismantling The Paving Stone Surface; E) Construction Of A Surface From Concrete Paving Stones - Demolition Material; F) Performing Mechanical Cleaning And Cold Spraying Of Asphalt Emulsion On The Base And Bituminous Surface; G) Leveling The Existing Foundation With A Mineral And Asphalt Mixture; H) Making A Wearing Course Of Mineral-Bituminous Grit Mixtures, Thickness After Compaction: 5 Cm; I) Completing The Roadsides With Crushed Stone, 10 Cm Thick After Compaction; J) Execution Of Thick-Layer Horizontal Markings. The Detailed Scope Of Works Is Included In The Design Documentation, Temporary And Permanent Traffic Organization Design, Technical Specifications For The Execution And Acceptance Of Construction Works And In The Bill Of Quantities Constituting An Auxiliary Part Of Determining The Quantity Of Works. Design Documentation Adapts The Facility To The Needs Of All Users, Including Accessibility For Disabled People. As A Public Facility, After The Reconstruction, It Will Not Have Any Restrictions On Accessibility By All Road Users, Including Disabled People, Which Is Required By Regulations Regarding Requirements, Among Others. For Technical Conditions That Should Be Met By Public Roads And Road Engineering Structures (Journal Of Laws Of 2022, Item 1518). The Bill Of Quantities Is Of An Auxiliary Nature. Before Submitting An Offer, The Contractor Is Obliged To Carefully Check The Quantity Of Works Against The Design Documentation. Due To The Fact That The Works Contract Is A Lump Sum Contract, If A Larger Number Of Works Occur In Any Item During The Works, They Cannot Be Considered Additional Works Requiring Additional Remuneration. The Possible Absence Of Certain Works Necessary To Be Performed On The Basis Of The Design Documentation In The Bill Of Quantities Or In The Bid Cost Estimate Template Does Not Release The Contractor From The Obligation To Perform Them On The Basis Of The Design Documentation At The Contract Price. The Contractor Has The Right To Adjust The Quantity Of Works In The Bill Of Quantities And The Bid Cost Estimate Template According To His Own Calculations Based On The Design Documentation.