Furniture Manufacturing Work: Roll-Out Bunk Bed Without Cover, 30 Pcs: Length - 1450 Mm, Depth - 600 Mm, Height - 650 Mm. The Bed Is Made Of 16 Mm Laminated Chipboard, All Parts Are Treated With Pvc Edges. The Bed Is A System Of Pull-Out Elements. The Single Design Is A Combination Of Two Beds Assembled Like A “Matryoshka Doll”. The Top Of The Beds Is Covered With A 16Mm Chipboard Sheet. The Back Sides Of The Beds Protrude, Which Allows The Beds To Cling To Each Other When Pulled Out. The Lower Parts Of The Bed Supports Are Equipped With Wheel Supports. Wheel Supports Are Of Industrial Type, With A Load Of At Least 30 Kg Per Wheel. The Wheels Must Ensure Silent Movement. The Fasteners Are Metal, Factory-Made. It Is Prohibited: The Use Of Low-Strength Plastic Load-Bearing Elements; Play In Joints; All Corners Are Rounded. Color: Ash-Shimo. Main Material: Laminated Chipboard, At Least 16 Mm Thick, Upper Surface Of The Bed: Laminated Chipboard, At Least 16 Mm Thick. Edge Treatment: Pvc Edge. The Design Of The Product Must Ensure Safe Operation To Prevent Injury. The Product Must Meet The Following Criteria: Factory Quality Of Processing, Uniform Gaps, Symmetry Of Design, Absence Of Assembly Defects, Stability Under Full Load. Materials Must Be Environmentally Friendly And Comply With Sanitary Standards. The Delivery Package Should Include: A Bed In Disassembled Or Assembled Form, A Set Of Fastening Elements, Instructions For Assembly And Operation, A Warranty Card For 12 Months From The Date Of Signing The Document. All Products Are Certified. Products Must Meet The Requirements Of The Following Standards: Gost 19917-2014 Gost 16371-2014 Gost 12.2.032-78
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
