Tenders Are Invited For Construction Of Municipal Roads In The Biłgoraj Commune

Part 1 Of The Order - Construction Of Municipal Roads With Drainage And Lighting In Service And Industrial Areas In Gromada. The Task Includes Two Sections Of The Road With An Intersection Connecting Both Sections And Inclusion Into The Dw Road. Section No. 1 From Km 0+000 To Km 0+313 Road Length - Approx. 313 M  Class D Municipal Road Single-Lane, Two-Lane Two-Way Road  Road Cross-Section - 1X2  Road Category - Municipal  Speed Up To Design - 30 Km/H Wearing Layer Made Using Asphalt Concrete Technology  Basic Road Width - 5.50 M Lane Width - 2.75 M  Roadside Width - 0.75 M Roadside Surface - Dirt With A Top Layer Of Natural Aggregate Axle Load - 115 Knosection No. 2 From Km 0+000 To Km 0+138 Road Length - Approx. 138 M  Class D Municipal Road Single-Lane, Two-Lane, Two-Way Road  Road Cross-Section - 1X2  Road Category - Municipal Design Speed - 30 Km/H Wearing Layer Made Using Asphalt Concrete Technology  Basic Width Roadway - 5.50 M Width Of The Lane - 2.75 M  Width Of The Shoulders - 0.75 M Roadside Surface - Dirt With A Top Layer Of Natural Aggregate Axle Load - 115 Knthe Scope Of Works In The Above-Mentioned Sections Includes, Among Others: A) Execution Of Earthworks B) Construction Of The Foundation C) Construction Of The Surface D) Construction Of Roadsides And Green Areas) Construction Of Drainage F) Construction Of Lighting G) Construction Of Traffic Organization Elements And Road Safety A Detailed Description Of The Subject Of The Order Can Be Found In Annex No. 1A To Swz - Design Documentation (Part 1 Of The Order - Construction Of Municipal Roads With Drainage And Lighting In Service And Industrial Areas In Gromada), Which Consists Of The Following Documents: 1) Architectural And Construction Design 2) Land Development Design 3) Designs Executive4) Traffic Organization Design5) Detailed Technical Specification For The Execution And Acceptance Of Works (Sstwior)6) Bills Of Quantities Note: Due To The Fact That The Contractors Remuneration Indicated In The Offer Will Be A Lump Sum, When Pricing The Offer, The Contractor Should Rely On The Scope Indicated In The Design Documentation Referred To In Point 4.4.1) Swz And Sstwior. The Bill Of Quantities Is Of An Auxiliary Nature. The Occurrence Of Works Not Included In The Bill Of Quantities Or Works In Larger Quantities Than Those Accepted In The Bill Of Quantities During The Implementation Of The Contract Will Not Entitle The Contractor To Demand Additional Remuneration - If These Works Were Included In The Design Documentation Referred To In Point 4.4. 1) Or Sstwior