Bids Are Invited For Acquisition Of A Plank Body, For Installation On A Truck Of The Municipal Secretariat Of Transport, Works And Urban Services Of Petrolândia/Sc

Acquisition Of Plank Bodywork. Chassis Made From Laminated I Beam 2Nd Core 6 Inches High. Sleepers Placed Every 400Mm On Laminated I Beam 2Nd Web 3 In Height. 8-Inch Side Finishing Profile Made Of 6.00Mm Thick Astm A36 Steel Sheets With 900Mm On Each Side, With A Checkered Plate With A Recess System In The Center. Recess At The Rear With Ramps For Lifting Machines (1200Mm), Made Of 3 Inch High Laminated I-Beam Covered In Astm A36 Checkered Steel Sheet With 2 Inch X6 Angle, 35Mm Thick. Front Mesh 100Mm Higher Than The Truck Cabin Made Of Astm A36 Steel Sheets With U-Type Profile Of 4.00Mm Thickness With Round Corners. Hydraulic Unit, Reservoir, 2 Electric Double Action Valves, 01 2-Slice Hydraulic Control With Lever For Ramp Movement (Lowering Or Retracting). 01 Hydraulic Cylinders Fixed On Each Ramp Interconnected To The Hydraulic Control And Hydraulic Hoses. Hydraulic Rear Ramp 2,400Mm Long By 700Mm Wide Manufactured In 3 I Beam, Fixing Eyes In Steel Sheets 5/8 Bushings And Thru Axle. 2 Paddle/Manual Support Shoe At The Rear For Loading Machines. 4 Simple Side Lashing Straps, 2 15T Ratchets To Tie Down The Machines That Will Be Transported. Rear Warning Plate And Stickers According To Abnt; Water Core, Spare Support, Tool Box. Rear Bumper And Side Protectors Approved By Inmetro. For Steel Fenders With Rubber Extension. Side And Rear Reflective Strips. Signals On Each Side In Accordance With Resolution 859/21-Contran. Surface Preparation Cleaning Using Phosphating, Leaving The Material In A White Appearance, Application Of Undercoat Against Oxidation, Final Finish With Application Of Polyurethane Pu Paint. Between-Axle Stretching Included.