Tenders Are Invited For Electrical Renovation Shooting Range In The Scope Of 2 Parts: Part 1: Electrical Renovation Garrison Shooting Range In The Military Complex In Hrubieszów; Vol. 2: Electrical Renovation Pistol Shooting Range At The Military Complex In Lublin.

Part 1: Renovation Of Elements Of The Garrison Shooting Range In The Military Complex At Ul. Chełmska 29 In Hrubieszów: I. Renovation Of The Main Bullet Trap - Removal Of A Layer Of Sifted Bulk Material With A Thickness Of 30 Cm - Replacement Of Used Geogrids, Arranged In Two Layers; - Manual Formation Of Embankment Soil - Leveling The Surface Of The Embankment; - Laying A Geogrid Made Of Polyester Fibers With A Square Mesh Of 30X30 On The Entire Embankment; - Laying A Cellular Geogrid Made Of Hdpe Polyethylene, 200 Mm High; - Laying A Geogrid Made Of Polyester Fibers With A Square Mesh Of 30X30 On The Outermost Parts Of The Embankment; Reconstruction Of The Removed Layer Of Sifted Loose Material On The Basis Of The Ball Trap, Supplementing It With Material With A Granulation Of 2 To 5 Mm And Modeling The Slope;  Replacement Of The Wooden Cladding On The Reinforced Concrete Structure Of The Ball Trap In The Quantity Assumed In The Bill Of Quantities - Wooden Cladding Made Of C27 Class Wood, Made Of 5 Cm Thick Boards, Tight, Attached To The Reinforced Concrete Wall Using A Supporting Structure - 80X80 Mm Wooden Beams;  Replacement Of Boards Securing The Places Where The Wooden Cladding Is Attached To The Supporting Structure - Beams; The Boards Should Be Attached To The Front Wall Through Carpentry Joints - Double-Sided Rings Diameter 65 At A Spacing Of 36 Cm; Two-Time Impregnation Of The Entire Main Bullet Trap (Including The Roof And The Cell Service Shelter), A Black Impregnation Should Be Used; Replacement Of The Cladding Made Of Boards Of Thickness 5 Cm On The Retaining Wall Of The Main Bullet Trap, Impregnation Of The Replaced Cladding Twice, Black Impregnation Should Be Used; - Removal And Disposal Of Demolition Elements. Ii. Renovation Of The Lower Ball Trap Removal Of The Used Geogrid From The Lower Ball Trap, Lower Ball Trap - Earth Embankment With A Height Of 0.9 M, Crown Width Of 1.0 M And Slope Inclination Of 1:1; Modeling Of The Embankment Slopes - Leveling The Embankment Surface; Laying A Geogrid Made Of Polyester Fibers With A Square Mesh Of 30X30 On The Entire Embankment; Supplementing With Loose Material With Granulation From 2 To 5 Mm On The Entire Ball Trap; Manual Compaction Of The Layer Of Material; Cleaning Of The Cladding Made Of Boards Of Thickness 5 Cm On The Retaining Wall Of The Lower Bullet Trap; Two-Time Impregnation Of The Cleaned Board Cladding, Black Impregnation Should Be Used; Removal And Disposal Of Demolition Elements - Geogrid. Iii. Renovation Of Shooting Screens - Replacement Of Wooden Elements Masking The Structural Elements Of The Screen - Wooden Logs With Dimensions Of 16X16 Cm And A Length Of 145 Cm, Replacement Of Boards With Dimensions Of 5X16x145 Cm; - Replacement Of Wooden Elements Masking Reinforced Concrete Lintels - Cover Beams With Dimensions Of 25X40 Cm And A Length Of 240 Cm; - Replacement Of Wooden Elements Masking The Lintel Cover Beams - Protective Formwork With Dimensions Of 5X40 C