Tenders Are Invited For Reconstruction Of Part Of The Municipal Road No. 080313C Augustowo - Mały Głęboczek - Janówko In Janówko

The Subject Of The Order Is The Reconstruction Of Part Of The Municipal Road No. 080313C Augustowo - Mały Głęboczek - Janówko In Janówko, Brzozie Commune, District 0003 Janówko, Plot No. 21; 105/1; 150/1; 150/7; 151 Precinct 0005 Mały Głęboczek Plot No. 25. The Scope Of Works Includes Reconstruction Of The Road: - Earthworks - Excavations, Moving, Planting And Removal Of Soil - Making A Base Of Crushed Aggregate. Stab. Mechanically - Laying The Binding Layer Of Asphalt Concrete - Laying The Wearing Course Of Asphalt Concrete - Land Reclamation - Making Vertical Markings Designed Area Development Technical Parameters - Technical Class Of The Road - Municipal Public L - Local - Design Speed Vp = 30 Km/H The Geometric Parameters Of The Road Are As Follows: - Road Width - 4.5 M - Concrete Surface Asphalt - Transverse Slopes - Roof And One-Sided - 2-3% Parameters Of Exits - Width 5.0 M - Asphalt Concrete Surface - One-Sided Transverse Slope Adapted To The Longitudinal Profile Of The Road Side - Width Up To 0.5 M - Crushed Aggregate Surface. Stab. Down. Thick 15 Cm - One-Sided Transverse Fall 8% From The Road Characteristic Technical Parameters Of The Road · Road Class - Municipal Road L Local · Traffic Category - Kr 1 · Length - 999.0 M · Road Width - 4.5 M · Surface - Road: Asphalt Concrete - Exits: Asphalt Concrete All Works Should Be Carried Out In Accordance With Art Construction And Under The Supervision Of An Authorized Person. Note: At Least 3 Days Before The Commencement Of Works, The Contractor Should Perform A Trial Section In The Place Indicated By The Ordering Party. The Area Of ​​The Trial Section Should Be 1,813 M2. The Contractor May Start Constructing The Substructure After The Ordering Party Has Accepted The Trial Section. A Detailed Description Of The Order Is Included In The Annex To Swz No. 1 - Technical Documentation. The Ordering Party Provides The Bill Of Quantities, However, Due To The Fact That The Contractors Remuneration Indicated In The Offer Will Be A Lump Sum, The Contractor Should Base The Offer Price On The Scope Indicated In The Design Documentation And Stwiorb. The Bill Of Quantities Is Of An Auxiliary Nature. The Occurrence, During The Implementation Of The Contract, Of Works Not Included In The Bill Of Quantities Or Works In A Larger Quantity Than That Accepted In The Bill Of Quantities Will Not Entitle The Contractor To Demand Additional Remuneration If These Works Were Included In The Design Documentation Or Stwiorb.