Quotation are invited for Supply Gorman Rupp Pump Delivery Date: 2026/06/29 Delivery To: Water Services Delivery Address: 1 Raapenberg, Mowbray Closing Date: 2026/04/02 Closing Time: 04:00 PM Description: 1 each x supply gorman rupp pump Specification: * REFER TO GE12600567 Supply Gorman rupp Specification: PUMP SPECIFICATIONS Size 3#h x 3#h (76 mm x 76 mm) NPT #] Female Impeller Type Semi-Open, Two Vane Solids-Handling Capability 2 1/2#h (63,5 mm) Spherical Diameter Seal Type Cartridge Type, Mechanical, Oil#]Lubricated, Double Floating, Self#]Aligning Radial Bearing Open Single Row Ball Thrust Bearing Open Single Row Ball Bearing and Seal Cavity Lubrication SAE 30 Non#]Detergent Oil Maximum Operating Pressure 86 psi (593 kPa)* Max Temp of Liquid Pumped 160#F (71#C).* PUMP MATERIALS Casing Gray Iron 30 Impeller Ductile Iron 65#]45#]12 Impeller Shaft Alloy Steel 4150 Shaft Sleeve Alloy Steel 4130 Seal: Stationary Face Rotating Face Elastomer Tungsten Titanium Carbide Tungsten Titanium Carbide Fluorocarbon FKM, (VitonR or Equivalent) Replaceable Wear Plate: Carbon Steel 1015 Removable Adjustable Cover Plate Gray Iron 30 Removable Inspection Cover Plate Gray Iron 30 . 12 lbs. (5,4 kg.) Flap Valve Neoprene with Nylon and Steel Reinforcing Seal Plate Gray Iron 30 Bearing Housing Gray Iron 30 Flanges Gray Iron 30 Gaskets Buna#]N, with Compressed Synthetic Fiber, Vegetable Fiber, PTFE, Cork and Rubber O#]Rings Buna#]N Hardware Standard Plated Steel Contact Details of Project Manager: Nolubabalo Mtotoyi / Gobelo - 021 400 6079 Email -
[email protected] IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/318830
