Galvanized Glove 3/4 Galvanized Malleable Iron; In Malleable Iron; With Threadable Joint Connection; Manufacturing According To Nbr 6943; Hot Dip Zinc Coating; Coating Standard According To Nbr 6323; With Thread Type Bsp (Nbr Nm Iso-7); With Nominal Diameter Of 3/4. They Are Applied For The Conduction Of Water, Gas, Steam, Oil And Other General Hydraulic Applications. Characteristics: - Material: They Are Produced In Black Malleable Iron, In Compliance With Abnt Nbr 6590, Iso 5922 And En 1542 Standards. - Galvanized Iron - Thread: Bsp Manufacturing Standards: - They Are Produced In Accordance With The Specifications Of Abnt Nbr 6943, Iso 49 And En 10242, “Galvanized” Nipple 3/4” Galvanized Malleable Iron; In Malleable Iron; With Threadable Joint Connection; Manufacturing According To Nbr 6943; Hot Dip Zinc Coating; Coating Standard According To Nbr 6323; With Thread Type Bsp (Nbr Nm Iso-7); With Nominal Diameter Of 3/4. They Are Applied For The Conduction Of Water, Oil And Other Hydraulic Applications In General. They Are Produced In Accordance With The Specifications Of The Standards Abnt Nbr 6943, Iso 49 And En 10242 - Material: Produced In Black Malleable Iron, Iso 5922 And En 1542. Thread: The Sealing Threads Are Produced In Accordance With The Specifications Of The Standards Nbr Nm Iso 71 And The Coupling Threads, In Accordance With Abnt Nbr 8133 And Iso 228 Produced With Black Finish (Non-Toxic Oil) Or Hot Dip Galvanized (Hot Dip Zinc Plating), According To Abnt Nbr 6323, Elbow “Galvanized 3/4” Galvanized Malleable Iron; In Malleable Iron; With Threadable Joint Connection; Manufacturing According To Nbr 6943; Hot Dip Zinc Coating; Coating Standard According To Nbr 6323; With Thread Type Bsp (Nbr Nm Iso-7); With Nominal Diameter Of 3/4. They Are Applied To Conduct Water, Iso 49 And En 10242. They Are Produced In Black Malleable Iron, Iso 5922 And En 1542. The Sealing Threads Are Produced In Accordance With The Specifications Of The Standards Nbr Nm Iso 71 And The Coupling Threads, Iso 49 And En 10242 - Material: Galvanized Iron - Thread: Bsp - Degrees: 90 - Size (In): 3/4, Compression Adapter Rm In Pp 20X 3/4 Connections In Polypropylene (Pp): Manufactured In Polypropylene According To Nbr 9798 Polypropylene Pe-5 Connections For Building Water Connections (April/1987); Function: Promote The Connection Between Pe Tubes With Mechanical Compression Joints, And, Or, Pe Tubes With Tubes Made Of Other Materials. Color: Black; Diameters (Gauges): 20Mm And 32Mm; Internal Pressure: 1.6Mpa (16Kgf/Cm²). Including Dynamic Variations; Chemical Resistance: Compression Connections Were Developed For Conduit Of Potable Water. Nbr 8417 - Building Water Branch Systems - Polyethylene Pipes Requirements. (Black Color) Nbr 9798 - Polypropylene (Pp) Connections For Mechanical Joint For Pe-5 Polyethylene Pipes For Building Water Connections (April/1987); It/Ope 820-2 - Derivation Connections (Sanepar Standard). Nts 048 - Polyethylene Pipes For Building Water Branches. Nts 179 – Adapter And Union Of Plastic Material For 20 And 32 Polyethylene Pipes For Building Branches. Nbr 15803 - Buried Systems For Distribution And Adduction Of Water And Transport Of Sewage Under Pressure - Requirements For Compression Connections For Mechanical Joint, Service Tee And Connection Tee For Polyethylene Pipes With Nominal External Diameter Between 20 Mm And 160 Mm., 100-Meter Polyethylene Hose Pe 80 Dn 10 Of 20 Mm Withstand Service Pressure From 1 Mpa At Temp
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
