Tenders Are Invited For Construction Work – Ve480 Gebaeudeautomation

Construction Work – Ve480 Gebaeudeautomation. It Is A Laboratory Building. The Quantity Structure Of The Physical Data Points Of The Building Automation Amounts To Approx. 350 Binary Outputs, 330 Analog Outputs, 1760 Binary Inputs And 800 Analog Inputs. A Total Of 36 Automation Focal Points With 59 Control Cabinet Panels Are Planned. Of These, 9 Asps Are Intended For Laboratory And Room Automation On A Floor And Component Basis And Are Located Centrally In Msr Niches For Each Component. The Ga Network Is Designed As A Fiber Optic Network With Om 3 Multimode Fibers. The Automation Stations For System Automation Are Installed Close To The System In The Technology Centers On The 3Rd Floor And 1St Basement. On The 1St Floor, Two Laboratory Clamps (Approx. 45 Laboratory Rooms) Will Be Equipped With A Negative Pressure Control For Keeping Contaminants. The Reference Pressure For Pressure Control Is Brought To The Pressure Sensors Via A Reference Pressure Line As A Stainless Steel Press Fitting System. For Air Volume Balancing, Pressure Control And Fume Hood Control In The Laboratories, A Local, Dedicated Laboratory Automation System Is Used In Each Laboratory, Which Is Connected To The Building Automation Via A Bacnet/Ip Interface. The Approximately 260 Fire Dampers Are Connected Via A Bsk Bus System With A Control Center In The Asp15 In The 1St Basement.