Tenders Are Invited For Various Surface Works – Rdw In Biała Podlaska: Renovation Of Provincial Road No. 698, Section 78+650 To 83+000, 4.350 Km Long

Various Surface Works – Rdw In Biała Podlaska: Renovation Of Provincial Road No. 698, Section 78+650 To 83+000, 4.350 Km Long. The Subject Of The Order Are Construction Works Consisting Of: Renovation Of Provincial Road No. 698, Section 78+650 To 83+000, 4,350 Km Long. The Scope Of Works Includes: 1) Measurement Works; 2) Dismantling Of The Surface Made Of Concrete Paving Stones, Edges And Curbs Together With The Concrete Footing, With Removal From The Construction Site And Disposal At The Contractors Expense; 3) Milling Of The Existing Asphalt Surface Along The Entire Length Of The Renovated Section; 4) Excavation Of Soil For Pavement Construction; 5) Profiling And Compaction Of The Subgrade For The Construction Layers Of The Pavement; 6) Construction Of The Foundation From A C 3/4 Concrete Mixture With A Thickness Of 15 Cm After Compaction; 7) Leveling The Existing Foundation With A Concrete Mixture; 8) Making Grooves For Curbs And Edges; 9) Placing Concrete Curbs On A Concrete Footing With Resistance; 10) Placing Concrete Edges On A Concrete Bench With Resistance; 11) Height Adjustment Of Rainwater Inlets, Manholes Of Underground Equipment Wells, Water Supply Valve Boxes; 12) Construction Of A Surface With Concrete Paving Stones; 13) Cleaning The Surface Of Existing Asphalt Exits; 14) Cleaning And Sprinkling Of Construction Layers; 15) Making A Leveling Layer Of Asphalt Concrete; 16) Construction Of The Wearing Course Of The Road With Asphalt Concrete Thickness. 5Cm; 17) Supplementing The Surface Of Asphalt Exits With Asphalt Concrete Diameter. Gr. 3Cm; 18) Construction Of The Exit Surface From Mechanically Stabilized Crushed Aggregate 0-31.5; 19) Filling The Exits With A Dirt Surface With Soil Up To The Border Of The Road; 20) Completing And Planting The Roadsides Up To 0.5 M Wide At The Edge Of The Road On Both Sides; 21) Moving U-1A Bollards And Road Signs; 22) Execution Of Thin-Layer Horizontal Markings.