Manufacture Of Metallic Bench Measuring 1, 70X0, 70X, 095M. Built In 1020 Carbon Steel Sheet. For The Structure Of The Bench, Use Beam Type Profile /Udc/ 100X50x2, 65Mm. For The Berths (Top And Bottom) To Support The Wooden Planks, Use 1.1/2/X1/8/ Angles. To Close The Frames, Use 50Mm Thick Cambara Wood Planks. Electrostatic Painting In Royal Blue, Samae Standard. For Budget Purposes, See The Attached Sketch With Dimensions And Construction Format. The Final Measurements For Manufacturing Must Be Taken By The Supplier., Manufacturing Of Metal Bench 1, 90 For The Berths (Top And Bottom) To Support The Wooden Planks, Use 1.1/2/X1/8/ Angles. To Close The Frames, Use 50Mm Thick Cambara Wooden Planks. Electrostatic Type Painting In Samae Standard Royal Blue Color. For Budget Purposes, See The Attached Sketch With Dimensions And Construction Format. The Final Measurements For Manufacturing Must Be Taken By The Supplier., Manufacture Of A 4-Door Metal Cabinet In 1020 Carbon Steel. With A Structure In 20X20x1.5Mm Tubes, The Two Shelves, The Dividers And The Sides In 1.5Mm Thick Sheet Metal. With Handles And Hinges. The Doors Must Have A Lock For Placing A Padlock. For Budget Purposes, See The Attached Sketch With Dimensions And Construction Format. The Final Measurements For Manufacturing Must Be Taken By The Supplier., Manufacturing Of 2-Door Metal Cabinet In 1020 Carbon Steel. With 20X20x1 Tube Structure, 03/23/2026 - 08:18:00
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
