Tenders Are Invited For Purchase And Delivery Of 60 Tons Of Heated Wire For Baling Waste

1. The Subject Of The Order Is The Supply Of 60 Tons Of Heated Wire For Baling Waste With The Following Parameters: • Annealed Wire, Cold Drawn, Oiled, Diameter: 3.5 Mm (Diameter Tolerance +/- 0.02 Mm), Made Of Non-Alloy, Low-Carbon Steel C - Max 0.12%, • Tensile Strength Rm 370-400 Mpa, • Pkwiu 24.34.11.0• The Wire Must Meet The Standard Pn-En 10218-2 Steel Wire And Wire Products General Provisions, Pn-En 10016 Non-Alloy Steel Wire Rod For Drawing And/Or Cold Rolling. Requirements For General Purpose Wire Rod. • The Contractor Is Obliged To Provide The Necessary Documents Confirming Compliance With The Above Standards For Each Batch Of Wire Delivered • Each Batch Of Delivered Wire May Be Tested By The Ordering Party, And If The Higher Standards Are Not Met, The Batch Will Be Returned To The Contractor • Wire Packed In Coils 300 - 550 Kg, Internal Diameter 450 Mm, External Diameter Approx. 750 Mm, Coil Height Approx. 500 Mm, Delivered On Wooden Transport Pallets Protected With Protective Foil (E.G. Stretch).• Order Completion Date Up To 60 Days From Signing The Contract, With: A) First Delivery Up To 20 Days From Signing The Contractb) Second Delivery Up To 40 Days From Signing The Contract (But Not Earlier Than 30 Days From Signing The Contract)C) Third Delivery Up To 60 Days From Signing The Contract (But Not Earlier Than 50 Days From Signing The Contract)3. Equivalent Solutions: 1) If The Ordering Party Uses The Standards, Approvals, Technical Specifications And Reference Systems Referred To In Art. 101 Of The Public Procurement Law, They Should Be Understood As Examples. The Ordering Party In Accordance With Art. 101 Section 4 Of The Public Procurement Law Allows In Each Case The Use Of Solutions Equivalent To Those Described In The Content Of The Swz. Each Time A Standard Is Indicated In This Swz Or The Annexes To The Swz, It Should Be Assumed That The Phrase Or Equivalent Was Used In Reference To It. In All Places Of The Swz And Annexes To The Swz In Which An Example Of A Trademark, Patent, Origin, Source Or Specific Process That Characterizes Products Or Services Provided By A Specific Contractor Is Used, Or If The Ordering Party Described The Subject Of The Contract By Reference To Standards, Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2) And Section 3 Pzp, And In Each Case, Acting In Accordance With Art. 99 Section 6 And Art. 101 Section 4 Of The Pzp, The Ordering Party Allows Solutions Equivalent To Those Specified In The Swz And In The Annexes To The Swz, Marking Such Indications Or References With The Words Or Equivalent Or Or Equivalent, Respectively, Provided That Parameters Are Not Worse Than Those Specified In The Description Of The Subject Of The Order. An Equivalent Solution Is Also Permissible If The Word Equivalent Or Equivalent Is Not Included In The Description Of The Subject Of The Order. Equivalence Consists In The Possibility Of Offering The Subje