Bids Are Invited For Acquisition Of Lockwork Materials

Sae 1020 Carbon Steel Flat Bar, Hot Rolled, 3/8 X 1/8 (22, 23Mm 7008, 23/03/2026 - 13:37:02, 23/03/2026 - 13:37:03, Sae 1020 Carbon Steel Pulley, Diameter 2.1/2(63.5Mm), With Two Ball Bearings, Central Shaft In Treated Steel, Suitable For Sliding Gates, Finishing Zinc Plated Or Galvanized, Smooth Burr Surface In Accordance With Good Manufacturing Practices, Diameter 3 (76, 2Mm), Smooth Burr Surface, Suitable For Sliding Gates In Accordance With Good Machining And Assembly Practices, Diameter 4 (101, 6Mm), Guide Bearing In Carbon Steel Sae 1020, Type U Profile For Rail 2, With Central Shaft In Treated Steel, Two Ball Bearings, Zinc Plated Or Galvanized Finishes, Smooth And Burr-Free Surface Suitable For Sliding Gates, Seamless Driving Steel Tube, Nominal Diameter 4(101, Schedule 40, Wall Thickness 6.02Mm, Grade A, Manufacturing Length 6, Smooth Ends, Surface With Protective Coating, Manufactured According To Astm A106 Or Api 5L Gr. B Standards, Carbon Steel, Cutting Disc For Metals, Diameter 10(254Mm), Thickness 1/8(3, Central Hole 3/4(19.05Mm), Made From High-Resistance Abrasive Material, Suitable For Cutting Steel In Ferrous Metals In General, According To Standards Applicable Safety, Diameter 7(˜ 178Mm), Central Hole 7/8(22, 23Mm), Made Of Abrasive Material For Cutting Steel In Ferrous Metals, Flat And Balanced Surface Without Defects., Thickness 1/16(1, Abrasive Material For Cutting Steel In Metals With Reinforcements In Screens Or Mesh, No Visual Defects, Diameter Ø4.1/2(˜ 114, 3Mm), Thickness 3/64(˜ 1, 19Mm), Central Hole 7/8(˜22, Made Of Abrasive Material Suitable For Cutting Ferrous Metals, With Mechanical Reinforcement (Screen Or Similar) Balanced Surface Without Defects., Diameter 4.1/2(˜ 114, Thickness 1/8 (˜ 3, Made Of Abrasive Material For Cutting Ferrous Metals, With Reinforcement Balanced Surface Without Visual Defects, Coated Electrode Type E6013, Diameter 3, 25 Mm, Standard Length Rods, Suitable For Welding Carbon Steel In Varied Positions, Stable And Good Coating Penetration, Metalon (Rectangular Carbon Steel Tube) Section 30Mmx50mm, Wall Thickness 2.00Mm(Plate 14), Length 6, Straight Ends, Smooth Surface Without Deformations Or Cracks, Metalon (Rectangular Carbon Steel Tube) Section 60Mmx60mm, Metalon (Rectangular Carbon Steel Tube) Section 50 Mm Deformations, Metalon (Rectangular Carbon Steel Tube) Section 25Mmx25mm, Metalon (Rectangular Carbon Steel Tube) Section 20Mmx20mm, Metalon (Rectangular Carbon Steel Tube) Section 30Mmx20mm, Sae 1020 Carbon Steel Sheet Metal, Dimensions 3000Mmx 1200Mm, Thickness 3/4(˜19, Flat Finish, Smooth Surface Without Cracks, Warps Or Burrs, Manufactured According To Standards For Thick Carbon Steel Plates., Thickness 3/8(˜9, 53Mm), Smooth Surface Free From Cracks, Oxidation Or Deformation