Long Sleeve Gandola: Made From Lightweight Professional Rip Stop Fabric, In Pantone Color 19-4004 Tpx, In Accordance With The Fabric Data In The Annex, Which Must Meet The Minimum Durability, Performance And Resistance Ratings Indicated In This Annex. Cutout In A Half Upper Sleeve, Cuff, Above The Bust, Collar, And Sides In The Shape Of A Half Moon With A Straight Upper Part To The Hem, As Per The Reference Image. Central Cutout Front And Back, Lower Half Sleeve And Pockets, In Ripstop Fabric In Fluorescent Yellow Color According To The Attached Fabric Data, Indicated In This Annex. Traditional Sport Collar; Vista Buttoning With 5 To 6 Buttons With 16 Mm Diameter, 100% Polyester In Black, Horizontal Buttonhole. Martingale 5Cm Wide Applied To The Shoulders, With Buttons For Closure, Diameter Of 16 Mm, And Buttonhole, With Double Stitching. Long Sleeve Containing A 3Cm Wide Placket In Fluorescent Yellow Made From The Same Fabric As The Piece With Its Triangular Upper Part, Cuff Closure With 2 Buttons Measuring 16Mm In Black, Cuffs 5Cm Wide. 02 (Two) Pockets With Chamfered Corners Male Pleat On The Front, 3Cm Wide; And To Close The Pocket, A Lapel With Closure Using A Black Button With A Diameter Of 16 Mm Must Be Applied To The Lapel On The Left Side Of The Wearer. On The Upper Right Part There Must Be An Opening For The Passage Of A Pen, Pockets And Lapels Stitched At Their Ends And Stitched Using A Two-Needle Machine. Application Of 2Cm Wide Velcro For The Identification Stripe On The Front Right Side Of The Wearer, Above The Reflective Strip. Retroreflection Strips: Application Of Abnt Nbr 15292 Reflective Tapes: Retroreflection Coefficient 500 Cd/ (Lx.M²) According To Fabric Specifications, 05Cm Wide, Being: On The Front, Located Above The Pockets, On The Right And Left Sleeve, And On The Back..., Operational Pants: Made From Heavy Rip Stop Fabric, As Shown In This Annex. 40 Mm Wide Waistband, With The Application Of 5 External Belt Loops 10 Mm Wide, Made With The Same Fabric As The Piece, Finished With Bartacks And Topstitching With Side Seams; Front Waistband Closure With A 100% Polyester Button Measuring 17 Mm In Diameter In Black And Buttonhole. Fly Lined With The Same Fabric And High-Resistance Front Zipper Closure Whose Composition And Resistance Characteristics Must Be Proven By A Report, And A Bar For Reinforcement. Knife-Style Front Pockets, With A Bar At The Ends Of The Mouth Opening, The Internal Linings Of The Front Pockets Must Be Double, Made With The Same Fabric As The Pants. Two Built-In Back Pockets With Flaps, Closure Via Velcro With Dimensions Of 20Mm Wide X 10Mm Long In Black, Braided Corners And Lapel With Chamfered Corners, There Should Also Be A Pocket On Each Side With A Male Pleat And Lapel Closure And 2Cm Wide Velcro In Black, Stitched Pockets On The Edges And Sides With Two-Needle Straight Machine. Reinforcement Of The Same Fabric And Color With An Internal Padded Blanket, At The Height Of The Back Horse, Its External Seams Must Be On A Straight Two-Needle Machine. The Internal Side Seams, Crotch Seams, Front And Back Seams Must Be Made Using An Interloque Machine. The External Side Seams, The Front Hook, The Back Hook And The Back Reinforcement Must Be Stitched Using A R Machine.
