Tenders Are Invited For Approval Plans, Working Drawings And Specifications – K25185 Design Of Szerémi Út District Heat Distribution Pipeline

Approval Plans, Working Drawings And Specifications – K25185 Design Of Szerémi Út District Heat Distribution Pipeline. Xi. District Szerémi Street Dn150 Reinforced Concrete Channel District Heat Distribution Pipeline In The Section Between Shaft Marked A000051 (25-2-5620) And Shaft Marked 25-2-5615, Hauszmann A. Street Isoplus End Point, With 260 Nyfm Dn150, Single-Reinforced Insulation, Pre-Insulated District Heating Pipe Execution And Licensing Planning Of The Renovation, As Well As Optionally Providing Design Management Tasks. Tasks: 1) The Task Is Xi. District Parallel To Szerémi Út, Mostly On Private Land, For The Renovation Of The Dn150 Reinforced Concrete Channel District Heat Distribution Pipeline, Preparation Of Authorization And Execution Plans For The Section Between The Shaft Marked A000051 (25-2-5620) And The Isoplus End Point At Hauszmann A. Street After The Shaft Marked 25-2-5615, 260 Nyfm Dn150, With 1 Times Reinforced Insulation, Pre-Insulated District Heating Pipe. 2) The Planners Task Is Approx. From The Isoplus End Point. Designed For 10 Meters, Hauszmann A. U. No. 7 When Disconnecting The Connection Line For The District Heating Supply, Also Planning The Elimination Of The Scouring That Will Be Created On The Dn150/280 Isoplus Line And Making The Pipe Continuous. 3) The Demolition Of The Existing 150/55 Size Reinforced Concrete Channel And The Existing 2Xdn150 District Heating Pipes Must Be Planned. The Planned Pair Of 2Xdn150/280 Pre-Insulated, Steel Utility Pipes, Equipped With A Signaling System, Which Can Be Laid Directly In The Ground, Will Replace The Existing 2Xdn150 Route In A Reinforced Concrete Channel On Mostly Private Land. 4) The Designers Task Is Also To Plan The Replacement Of The Traditional Steel Pipes In The 5620 Shafts, As Well As The Architectural And Mechanical Review Of The Shaft, As Well As The Planning Of The Necessary Repairs (E.G. Concrete Repair, Repair Of The Operating Platform). 5) The Designer Is Responsible For The Complete Preparation Of The Licensing And Construction Plans Necessary For The Construction. Given The Changes In The District Heating Law Regarding The Licensing Of Pipelines, The Designer Must Participate In The Licensing According To The New Regulations As The Customers Representative. 6) During Construction, The Designer Must (Optionally) Also Provide Design Supervision. 7) The Designer Is Responsible For Preparing A Construction Schedule. 8) The Designers Task, If Necessary, Is To Design The Provisional District Heating Pipeline, Which Must Also Be Included In The Construction Plans. The Route Of The Temporary Line Can Be Changed Freely, It Is Recommended To Run It On The Edge Of The Working Trench, It Must Be Equipped With A Dn15 Venting Line At Its Highest Point And Must Be Thermally Insulated. The Connections Of The Temporary Line Must Be Made In Such A Place That These Places Can Be Eliminated During Live Connection. The Detailed Tasks And Technical Descriptions Are Contained In The Public Procurement Documents.