Tenders Are Invited For Modernization Of The Orlik 2012 Sports Complex In Izdebki

The Subject Of The Order Is The Renovation Of Sports Surfaces In The Orlik 2012 Sports Complex Located In Izdebki, Plot No. 5771. The Investment Plan Includes: A. General Works: - Repair Of Entrance Gates To Orlik - 2 Pieces; - Disposal Of Old Grass And Sbr Granules; - Repair Of Paving Stones And Its Partial Replacement On Roads And Access Squares To And Near Orlik; - Improvement Of The Damaged Fence Of Orlik; B. Works On The Football Pitch: - Machine Removal Of The Old Synthetic Surface On The Football Pitch (Minimum Sampling Width 150 Cm); - Leveling The Entire Subgrade Slab To Reach An Elevation Of 334.2 M Above Sea Level; - Adding Stone Dust With A Fraction Of 0.075 - 5 Mm On The Entire Pitch Slab - A Layer Of 1 Cm After Compaction. Leveling The Pitch; - Hardening The Slab To Is>0.97; - Laying Woven Synthetic Grass With Minimum Parameters: • Woven Grass With A Blade Height Of Min. 45 Mm, Meeting The Requirements Of Fifa Quality Concept For Football Turf (Manual 2015). Weaving Is A Method Of Simultaneously Braiding The Warp, Weft And Fleece Fibers Into One Product, On The Same Loom, At The Same Time, • Filling: Recycled Epdm, • Dtex Of The Bunch - Min. 13,000,• Fiber Thickness: First Fiber – Min. 460 Μm; Second Fiber – Min. 360 Μm; Third Fiber – Min. 360 Μm;• Number Of Tufts – Min. 10,000/M2, • Fleece Weight – Min. 1,700 G/M2, • Bunch Pulling Force - Min. 70 N,• Strength Of Glued Joints After Aging – Min. 150 N/100Mm,• Water Permeability In The Grass: Minimum 6000 Mm/H,• Fiber Type: Polyethylene, Monofilament. Minimum Of Three Different Types Of Fiber Cross-Sections In One Bundle, • Backing: Pp/Pe - 100% Polyolefin, • The Use Of Latex Layers Using Butadiene And Polyurethane Is Not Allowed, • Color Of The Surface: Green In Three Different Shades, • Football Lines Glued Into The Surface. - Pasting The Lines Marking The Pitch In Accordance With The Requirements Of The Polish Football Association; - Backfilling The Pitch With Quartz And Epdm Granules In Accordance With The Manufacturers Requirements; - Replacement Of Football Goals And Nets With New Ones; - Repair Of Ball Catchers With Replacement Of Lines And Nets, As Well As Stabilization Of Load-Bearing Poles And Replacement Of Upper Crossbars In Ball Catchers; C. Works On The Multi-Purpose Pitch: - Removal Of The Top Layer Of The Pu Surface On The Multi-Purpose Pitch By Milling; - Priming Of The Pu Surface; - Laying A New Polyurethane Surface With The Minimum Parameters: • Type 2S Surface With A Thickness Of Min. 16Mm (8Mm+8Mm),• Lower Layer: - A Mixture Of Rubber Granules With Granulation Of 1 - 4Mm, Combined With A One-Component Polyurethane Binder;- Laid Mechanically, Seamlessly, Using A Polyurethane Mass Spreader (E.G. Planomatic);- Sbr Rubber Granules Are Mixed With The Polyurethane (Pu) System In A Mixer;- Layer Thickness Approx. 8 Mm;• The Upper Layer: - Consists Of Epdm Granules With A Granulation Of 1-3 Mm, Connected With A Single-Component Polyurethane Binder; - Is Laid Mechanically,