Bids Are Invited For Hiring An Engineering Or Architecture And Urban Design Company For The Construction Of A Roof For Events, Construction Of A Cafeterial, Adjustment Of The Pne Toilet, Construction Of A Bandches, Renovation And Restoration Of The Juca Maneca Square In The Municipality Of Pains-Mg. Resource: Transfer Agreement No. 981927/2025/Mtur/Caixa

Supply And Placement Of Work Sign Made Of Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1.25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, Rental Of Work With Template Of Boards Punched Every 2.00M, Reuse (2X), Including Monitoring Of Topographic Team To Mark Topographic Point, Rental Of Container With Thermal Insulation, Type 3, For Construction Warehouse/Tooling, With Reference Measurements Of (6) Meters Length, (2, 3) Meters Width And (2, 5) Meters Useful Internal Height, Including Internal Electrical Connections, Exclusive Mobilization/Demobilization And External Temporary Connections, Mobilization And Demobilization Of Container, Including Loading, Unloading And Transportation By Truck Body With Crane (Munck), Container Rental Exclusive, Fixed Protective Siding For Closing Work In Galvanized Metal Tile 308 Linear Meters, Corrugated Type, 5Mm, Including Spike And Fixing, 20/03/2026 - 13:49:26, 20/03/2026 - 13:55:40, 03/20/2026 - 13:55:56, 03/20/2026 - 13:56:09, Removal And Resettlement Of Pavement In Interlocking Or Hexagonal Concrete Block, With Reuse Of Blocks, Removal Of Pre-Cast Concrete Curb, Excavation And Mechanized Loading With Excavator In Material Of 1St Category, Manual Piping At The Bottom Of A Trench With Socket, Excluding Excavation, Transport Of Material Of Any Nature By Truck, Distance Greater Than 5Km And Less Than Or Equal To 10Km, Within The Urban Perimeter, Excluding Loading, Including Unloading, Lean Concrete, 1:3:6 Mix, Prepared On Site With A Concrete Mixer, Without Structural Function, Steel Cutting And Bending Ca-25, Diameter 6.3 Mm. Af_06/2022, Cutting And Bending Of Ca-50 Steel, Diameter Of 10.0 Mm. Af_06/2022, Formwork And Shaping For Girder/Block With Resin Plywood, Esp. 12Mm, Reuse (3X) (Foundation), Footing Concrete, Fck 30 Mpa, Using Pump - Laying, Densifying And Finishing. Af_01/2024, Curb Guide (10X15x22)Cm And Gutter (30X10)Cm With 10% Slope, In Concrete With Fck 15Mpa, Molded In-Situ, Wood Form, Including Excavation, Piling And Transport With Removal Of Excavated Material (In Bucket), Application Of Grout With Cement Mortar, Lime Hydrated, Sand And Crushed Stone, Trace (1:0, 1:3:2), Including Mechanized Preparation, Transport And Launch, Block / Interlocked Concrete Floor - Wave Model / 16 Faces / Rectangular / Brick / Paver / Dutch / Cobblestone, 20 X 10 Cm, E= 8 Cm, Resistance 35 Mpa, Natural Color Ref 36170, Simple Cast Iron Grille With Frame, 150 X 1000 Mm, Laid With Mortar 1: 3 Cement: Sand - Supply And Installation. Af_05/2025, Supply Of Metallic Structure And Metallic Frame, In Steel, For Roof, Exclusive Tile, Including Manufacturing, Transport, Assembly And Application Of Anticorrosive Preparation Base On Metallic Surface, One (1) Coat, Covering In Corrugated Galvanized Metallic Tile, Simple Type, 50Mm, Natural Finish, Including Accessories For Fixing, Supply And Installation, Painting With Alkyd Finishing Paint (Synthetic Satin Enamel) Sprayed On A Metal Profile Made In The Factory (By Coat). Af_01/2020_Pe, Metal Pillar Anchor Set, Including 220X220x8mm Plate, Four 12Mmx160cm Anchors, 1 Support Angles, Grout, Nut