Bids Are Invited For Exclusive Contracting Of Beneficiary Companies Of Lc 123/06 For The Supply Of Furniture And Linen, For The Department Of Education, Culture, Sports And Tourism, As Described In Annex I – Term Of Reference Of This Notice, Through Bidding Process Nº 274/2026, In The Electronic Auction Modality Nº 22/2026, Through The Price Registration System Nº 19/2026, Through The Website Www.Pregaoonlinebanrisul.Com.Br.
Bids Are Invited For Exclusive Contracting Of Beneficiary Companies Of Lc 123/06 For The Supply Of Furniture And Linen, For The Department Of Education, Culture, Sports And Tourism, As Described In Annex I – Term Of Reference Of This Notice, Through Bidding Process Nº 274/2026, In The Electronic Auction Modality Nº 22/2026, Through The Price Registration System Nº 19/2026, Through The Website Www.Pregaoonlinebanrisul.Com.Br.
Tall Closet Two Doors. Furniture Composed Of Two Doors And Three Internal Shelves. Made From 15Mm Mdp Coated In Low Pressure Melamine. Bottom In 3Mm Sheet Metal. Edges In Pvc Laminate, Glued With Eva Hot-Melt Glue. Skirting Board In 20X40 Steel Tube (1.06Mm Wall), Forming A Frame Around The Entire Perimeter Of The Cabinet Base, Set Back Approximately 20Mm From The Sides. Welds Using The Mig Process. Protection Of The Baseboard Surface With Special Environmentally Friendly Treatment, Called Nanoceramic System. On The Aerial Route, The Product Is Bathed By A Spray System In Several Stages, Using Anticorrosive And Degreasing Agents. Painting By Electrostatic System In Gray Epoxy Powder (Ral 7040), With A Minimum Layer Of 40 Microns And Curing Process In An Oven At 220°C. 4 1/4 Rivet Nuts Riveted On The Frame For Attaching A Threadable Shoe (For Cabinet Level Adjustment). Frame Fixed To The Base Of The Cabinet Using 8 Screws. Plastic Handles And Metal Lock With Key. Approximate Dimensions: 1600X1000x450mm (Hxwxd). Present Along With The Price Proposal, On Behalf Of The Furniture Manufacturer, The Chain Of Custody Certificate For Wooden Products (Fsc), Issued By A Nationally Or Internationally Recognized Certifier On Behalf Of The Furniture Manufacturer, In Compliance With Decree No. Third Parties. Certificate Of Conformity For Preparation And Painting Process On Metallic Surfaces, Issued By Ocp Accredited By Inmetro, According To Certification Model 6, Meeting The Applicable Requirements Of The Following, Low Cabinet 2 Doors. Made From 15 Mm Mdp Coated In Low Pressure Melamine, Edge Finishing In Pvc Profile, Glued With Eva Glue. Bottom In 3Mm Sheet Metal. Furniture Composed Of Two Doors, Plus An Internal Shelf. Skirting Board Made Of 20X40 Steel Tube (Wall 1, With A Minimum Layer Of 40 Microns And Curing Process In An Oven At 220°C. 4 1/4 Rivet Nuts Riveted On The Frame For Attaching A Screw-On Shoe (For Adjusting The Level Of The Cabinet). Frame Fixed To The Base Of The Cabinet Using 8 Screws. Handles Plastics And Metal Lock With Key. Approximate Dimensions: 720X1000x415mm (Hxwxd). Submit The Price Proposal For The Purpose Of Proving The Sustainability Guidelines In Contracting, Meeting The Applicable Requirements Of The Following, Steel Closet/Wardrobe. Overlapping Steel Wardrobe With Sixteen Doors. Python Lock For Padlock. Made From 26 Sheet Steel. Label Holder On The Front Of The Doors., 1.40 Cm Wide, 100% Cotton. 100% Cotton, For Making Towels, Width 140Cm, White Mdf Counter. Counter With Nine Open Niches And Colored Shelves: Structure In 15Mm Mdf-Bp Sheet, Shelves Finished On The Upper Surface In Colored High-Pressure Melamine Plate, 0.8Mm. Pvc Edge, 45Mm, White, Glued With Eva Hot-Melt Glue. Bottom In 3Mm Mdf Sheet. Four Metal Feet, Made With Welded Steel Tube And Sheet And Painted With Gray Epoxy Powder Paint And Black Resin Tips. Counter (With Feet): 1270X12
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
